Search:

Can you send me the control serial number so I will send you instruction to resolve the Alarm 77-7?

you maybe have another problem with your DV5 board but the Permanent Option not restored is an...

you cannot use the SSD board to change the HHD only can you use the Compact Flash Board with CF-IDE adapter.

the maximun size of the hard disk is according the PCA board that you control are using...

Dear Sir

Please turn off the machine and turn ON again.
Them you must check the diagnostic screen and look at if everything pass.

Or you can go to the program were software and check if the...

Did you check connecting a mouse años keyboard directry from the board on the control?

If not, Please do that an let me know

Can you check if the Tool changer is available in your MAI?

Please push the >> button
Them push Machine SETUP
In the left colums find the machine data Link
Them go to Tool seltler file
Check...

Check with another mouse connectec directly from the PCA board.
If the problem go on. you maybe have problems with your PCA.

Did you fix your problem? If not let me know to my Mail [email protected]

I will help you to fix your problem

Larry

Please send me the serial number of the control and machine serial number to send you the page for up grade the serial number in the image that you will get from the other machine.
Maybe...

The BIOS is according the part number because each part number has a BIOS.
Went you be there Please send me an e-Mail them I will send you the BIOS to the PCA board that you get.

Sir is not neccessary install any ethernet board or any other thing.

Only have to check the configuration of the communication software and put it into the A2100.

If you need help. I will send...

Rai

To use motion link or motion link plus you have to use a null cable.

If you get the communication with the driver check the alarm code in the alarm history in the motion link and send us.
...

Dear Sir

If you send me your e-mail address I will send you and procedure to bypass the brake and the instructions to get a norton ghost clone of you hard disk.

Regards

Yes we were that authorized cmi south america service center.
Also we have a great contact in England that have all information regarding the Arrow and Sabre Cincinnati Milacron models. If you need...

Yes I were the autorized facility in South America with these control. Also I have a record with the former England facility were the machine were made.

If you touch screen is not working maybe is the CKT board in side the Operation Panel, If you want to fix this problem you must buy the CKT board and change it, but first you must check some small...

Can you send me your real time processor board part number to send you the cmost to restart your machine?

Dear Sir

1. you cannot move the axis because the Z axe have a brake. the best way to fix this problem is taking out the limit switch and turning on the machine after you aling the machine you...

I´m not sure that you have problems with the spindle drive.

But the motion link software could be download from http://marianevej.dk/Default.aspx?pg=6c9dbbc9-e8fd-496d-b43b-1991d2306328

You...

Dear Tim

Can you send me the serial of the machine and the control please.

Just to try to help you

Take care

If the micro switch are ok you must check the temperature of the drivers, I had a customer that has this kind of trouble and the problem was that in the power supply of the drivers needs some...

If you wants to spend just the small price you can use a chinesse version of the GE Fanuc control.

But if you wants to get the best of the new cnc controls you can use Sinumerik 840D Solution Line.

Went you start the control between the memory test and the windows running push the number 8 or 6 and some menu will show the give you access to the windows.

If you need anything else please let...

Dear Sir.

You have to change you TX power supply, go to a computer store and buy an old TX's type power supply and change it in your control. you have to remember the conector P8 and P9 in the PCA...

Gabby

Can you send me the serial number of the control and the machine?
Do you have in the documentation of your machine the test book that Cincinnati include in their machines?

Please try it:...

If you need a replaced for that board you can contact Mr. David M. Escalona
his e-mail is [email protected], they have excellent price and delivery.

cncven

Can you check by program were the input I:030?

DO you know how you use the program were?

Dear Mr.
Can you send me the serial number of your machine and the serial number of your control.

Maybe you have to ajust the gaing in your drivers but I need to know what version of the...

Mr. Can you send me the serial number of your arrow machine and the serial number of your Acramatic 2100 control.
That is because you lost the files in your CNC and you will need a complete software...

This control were the first control of Cincinnati Milacron that used encoders.

Let me find for you the pin schematics for each encoders.

Maybe you have a wire broke.
CNCVEN

What model of control do you have in your machine?
What model of drivers?

Can you check the encoders?

the cause of your problems could be in the signals cables or the encoders.

But I need...