Hi FURQAN.
Look at: Home
I have myself bought their dripfeed / dnc upgrade with great result. You could not activate dnc on these controls without change chips / eproms on the motherboard....
Type: Posts; User: Swemill
Hi FURQAN.
Look at: Home
I have myself bought their dripfeed / dnc upgrade with great result. You could not activate dnc on these controls without change chips / eproms on the motherboard....
Well, i have not any conclusion on this yet but it seems that the dog / cam isn't worn and looks fine!
Could this have to do with the reference parameter? My reference feedrate parameter (1428) says...
I dont know if it's possible on a 3MA but have you tried with:
http://fanuc3mdripfeed.com ?
They have chips for 3M-C that works great!
Do you stand in tool change reference position?
G0G91G28Z0, or it also could be in a second ref. position =
G0G91G30Z0
Hmm... one more thing. I remember that one of the two switches inside the Y-axis limitswitch house were monted with a spring in one side and not 100% tightened. Should the switch be able to "move"...
Thank's everyone for your help! From your input on this i also think that it could be the switch or dog / cam! A "problem" with the adjustment procedure is that i think the cam isn't adjustable and...
Ok, thanks Memoryman! Maybe someone fill in here about to display the servo lag...
Is there any "fix" you could do yourself on the servos? If it has uneven wear for example?
Thanks!
Yes, no chips under covers. It's not long ago that i replaced the pallets and mounted a T-slot table. I'm also pretty sure that there's not been chips between trip dog and switch! This machine is...
Thanks Memoryman for your help.
My parameter 1420 says:
N1420A1P1200A2P1200A3P900A4P200
I believe that this is X:1200, Y:1200 and Z:900 feed, but what is A4?
This has been a pallet machine...
Has got great help here from you on the zone earlier and now i have a problem thats driving me crazy...
On my VMC kitamura mill with 10M control, i have sometimes had problem with when going to Y...
Well, it sure was the fuse on the I/O board! Ordered some new fuses yesterday after i checked it on the morning and got it today. Tested it tonight and bingo, it works again! :banana:
Thank you...
I'm not near my cnc at this time but i have documented that the I/O board is:
DI/O Board: A16B-1210-0322 A
When i google this i can see that there seems to be one green fuse at that board and i...
Thanks Al for your quick reply! No, i dont think that i found any "small" fuses..? Only some green fuses (not that small i think) and some bigger black fuses. Do you have any picture or link to the...
Did a big mistake and got a short circuit with the screwdriver when i should tighten the terminals on X-axis limit switch...
Have had problems with that the control sometimes does a limit switch...
Could you please inform about the rutine on how to do this? Backplot old nc-file in V9. How do i read / open an old program in V9 that hasn't been saved / drawn there earlier?
Thanks in advance!
You will also need your 8000 and 9000 programs. These have a parameter that locks them so make sure that they get backed up. They will not “punch” out of the control if they are locked.
To be...
There is a "search" function on the PC-DGN page, but i assume that it's not helping!? There i can see K000 - K0016 parameters with all 8 bits.
Punch out Parameters:
Select SERVICE screen.
Press PUNCH.
Press ALL.
Write down Option Parameters (or check if they were sent out with the parameters):
NC PRM #9000Number of axes
I did try that and it didn't work. On this control (10M-A) i couldn't search with the cursors. If i use both cursors in same direction (word + line cursor) it will move 1 page, but for search i need...
tc429: Test with search failed... I have no option to do only "search".
There is: "Search -W" and "Search -M".
With "Search-W" i get "Adress Nothing", and with "Search-M" - nothing at all - the...
Will try that tomorrow in the evening. It's midnight here now and time to sleep.
Thank you again tc429 for your interest / help! Do you think it's possible to "adjust" how the stacklight is fed?
I tried with "w-search' K1.0", and just "K" but i got "adress nothing" so it was like you guessed! Then i suppose that it's a "good thing", and i could do like i did - select what i want of the...
Thanks tc429 for your reply, but i have actually managed to get this working now! "Program end light" was in K00 and "end light on M00, M01" was in K01.
The green light in the tower seems to light...
Tried the setting with M00/M01 but that didn't made any difference.
Took the tower apart and well... there wasn't even any bulbs!
I have only looked at that it wasn't spinning because that i could...
Great! Im really glad that i could help!
I have no idea where the lights is connected but i have thought a long time that i should check that thing... Only hasn't been done yet.
I actually even...
Ok, thanks for your reply!
Then you also has the bit 6 activated for alarm light as i do.
A strange thing is that i now noticed according to my maintenance manual, that bit 1 in K00 is for "program...
Hi guys!
I wonder if you with 10M controls would like to share what data you have in PC - Keeper Nr.02 (Adress K01).
My reflect about this data is that this seems to control the tower - warning /...
Hi everybody!
I have a Mycenter1(B) -85 with a 10M-A control and i wonder if you that also have a simular could tell me what data you have in PC - Keeper Nr.02 (Adress K01).
My reflect about...
Had some time to check the machine this afternon and all parameters were still left. It was the pc timers, counters, keepers and data table that were all zero'd. Also my 9000 program and offsets were...
Ok? (and now you have told everyone what parameter 9110 does ^_^...)
Those custom macros you mention (p.7071-7079) have i been done myself and they is only to shorten down the code. Ex. M12 =
%...