Tapmatic 30X Tapping Head | eBay
Tapmatic N/C-R00 Tapping Head | eBay
Type: Posts; User: andy_con
Tapmatic 30X Tapping Head | eBay
Tapmatic N/C-R00 Tapping Head | eBay
heres the spec of the pump
Robinair RA15601 | Advanced Engineering
if the spec of the table doesn't say internal volume how do I know if this pump will be the right one for machining all the way through ally?
Robinair RA15601 Cooltech Vacuum Pump 240 / 110v | eBay
perfect just the sort of advice I was after.
this is the actual table I was looing at
Vacuum table VT3020 GR | Vacuum Tables UK
I want to machine all the way through, identical to datron in...
thanks for you reply, so are you saying both would work?
what sort of flow rate is an acceptable flow rate?
i was going to use a table that required a mat
GR Series | Product Categories |...
Im after some advice regarding a vacuum generator/pump for my cnc milling machine.
I want to be able to machine 5-10mm thick ally plates
I spoke to this company in the UK and they recommended...
I purchased one of these
Passive Probe | Tormach Inc. providers of personal small CNC machines, CNC tooling, and many more CNC items.
its comes with a long cable which you need to hard wire...
this
SEM HD ELECTRIC SERVO MOTOR Planetary Gearbox 0-6000 RPM CNC Router Milling | eBay
my denford triac has a SEM MT30U4-36 in it and its on its way out. keeps tripping my RCD and keeps...
relisted
Tapmatic N/C-R00 Tapping Head | eBay
im in the UK and can possibly help but I was struggling to understand the drawing. its not very clear
Renishaw Probe Set - TP6 & PH6 | eBay
I have for sale a Renishaw Probe set which consists of -
PH6 head
TP6 probe
3x extension poles
Tapmatic N/C-R00 Tapping Head | eBay
Tapmatic N/C-R00 Tapping Head
Purchased this on ebay last year and it wasn't working that great. so I sent it to Tapmatic UK for a complete service (as you...
are these any good / powerful enough for vacuum tables?
Compressed-air vacuum generator | Product Categories | Vacuum Tables UK
no more thoughts Christian Knüll??
I've checked electronics and all seems fine. I cannot find any manuals on how to get into the motor so cannot check encoder myself.
Well I do have three tapmatic tapping heads but the plan would...
Although generally its a great motor (£1500 new just for the motor), its got a problem. Something is up with the speed control part. It keeps revving up and down it won't stay constant
So its...
ok lets clear this up then
machine head
http://i187.photobucket.com/albums/x202/magicmushrooms1/cnc/DSC_1621_zpsa4d04374.jpg
sem servo motor at the back, with air feed power draw bar at...
I use mach3 so I'm assuming it's all possible then?
Also can you use m3 and m4 commands with these motors so it goes clockwise and anticlockwise?
No, not an atc motor. I'm after a new spindle motor, but like I say the motor connects to the spindle via a cog and belt
Thanks for your reply, I did ask an eBay seller and they didn't know what I was talking about.
my machine has an atc so the curent sem motor is connected via a cog and belt. the plan would be to...
im guessing the lack of responses means people are buying them without checking the full spec?
I have a denford triac and the sem motor inside has seen better days.
I note a lot of people are changing their motors for these Chinese ones with high rpm rates.
but im finding it impossible...
machined an iphone5 just as a bit of a fun project
http://i187.photobucket.com/albums/x202/magicmushrooms1/DSC_0624_zps54fe6023.jpg
...
bump
as title anyone used one?
Home - All Machine Parts, Inc.
looking to get one for my machine which is R8 taper
I just got a cracking deal on a denford starmill off ebay -
Denford Starmill | eBay
now new in 1995 there was an option for an ATC.
i would love to add an ATC to this machine but sorting the...
*** just seen your link to renishaw sorry.
not that its in that video but i have a reinshaw probe set here
so its a case of " a bad workman blames his tools"??
:(
hi everyone
currently i use a wobbler but its not accurate enough.
what is the most accurate way to find an edge?