Castors make racks mobile. They can be used to build transport trolleys and mobile workstations. item Castors can be fitted easily under standard profiles. Some models require Adapter Plates.
Castors are available in fixed and swivel models to support a range of transport functions. Swivel Castors with double-brakes ensure a firm footing by incorporating one brake for the wheel axle and one for the swivelling axle.
When placing an order, it is important to carefully consider the loads that the Castors will be carrying, as they will be supporting the weight of both the rack and its contents. item is always on hand to offer advice and support.
The infinitely adjustable feet are suitable for structures of all kinds.
Depending on the particular application, the adjustable feet can be fitted in the core bores of profiles or used in combination with Base Plates / Transport Plates. The range of applications can be extended by appropriate inserts and foot clamps.
The minimum foot height is obtained by removing the counter nut.
Handles are available in a variety of lengths to manoeuvre SystemMobiles L and SystemMobiles U. They also make it easier to transport even heavy loads manually. Robust die-cast handle mounts create a secure connection with the transport trolley. A special grip profile with a non-slip coating supports smooth pulling and pushing motions.
All the Handles Al are ESD-safe.
Made of solid aluminium, this Handle is an ideal long-term solution for moving large masses such as transport trolleys and heavy doors safely. The robust Handle is available in a straight design and a cranked version. The cranked version reduces the risk of crushing because the user’s hands are not positioned parallel to the outer edge.
Handle Al features concealed fixings. The Handle can be installed from the front using a special fastening set that is screwed to a stable panel element or into a profile groove.
This large Handle made of plastic is suitable for users of all shapes and sizes and is ideal for both swing and sliding doors that are used on a frequent basis. Handle PA 160, black from item can be screwed to the groove of a door frame or an inherently stable panel element in a door. Handles can also be fitted to the same position on both the inside and outside of a door.
Fixings are concealed from users. Thanks to the closed inner surface of the Handle, there are no protruding screws or similar elements to pose an injury hazard. It is advisable to use the Cap for Handle PA 160, as it adds a closed surface to the front of the Handle.
Handles PA from item are the universal solution for opening and closing sliding and swing doors. Made of robust plastic, the handles can be fitted to a profile groove or a panel element.
They feature a closed surface on the inside, thus ensuring users can get a firm and comfortable hold on them. Their concealed fastenings safely cover over screws and metal parts. A Cap is also available to cover over the channel at the front of the large Handle PA 160 and provide added ergonomic benefits.
The modified Handle X 160 PA is available for frames built using Line X. It features an elegant, rounded surface at the top of the grip as standard.
item Handles Al, which are made of solid aluminium, are ideal for moving large masses.
Swing, sliding or lifting doors can be produced with the aid of movable panel fasteners.
In this arrangement, the doors can be in the form of either inherently stable panels without frames or frame elements with integral panels.
When every detail counts, LED Illuminated Magnifier D150 is the ideal solution. Measuring 150 mm in diameter, the magnifier incorporates a ring of LEDs that provide glare-free lighting for workpieces. A dimmer function allows users to decrease brightness to as low as 10 percent. The scratch-resistant lens offers a distortion-free view of workpieces.
Thanks to six swivelling axes and a head joint that allows adjustment in three dimensions, the Illuminated Magnifier can be moved into the perfect position and locked in place. The balanced rods allow virtually effortless adjustment and support intuitive operation.
The LEDs have a service life of up to 50,000 hours and, with a connected load of just 14 Watts, use up to 40 percent less energy than conventional illuminated magnifiers. Besides being good for the environment, this energy saving system also supports sustainable cost efficiency.
With Machine Light Fittings available in five sizes, there’s a lighting solution for every machine. Everything from the most awkward corner to large cabins can be lit up. Thanks to IP 67 protection, the light fittings can also be used in harsh environments. They are fixed in place using a Line 8 groove, while an integrated hinge allows users to direct light where it is needed. When designing work benches, the Machine Light Fittings offer a space-saving solution for boosting lighting levels on the work surface.
Using the latest generation of LEDs, the fittings deliver clear energy savings and can also be combined with accessories including cables and electronic transformers. An ingenious system of power supply and control elements, cables and splitters makes it easy to configure customised lighting scenarios, even including dimmer functions.
Technical data for the various Machine Light Fitting designs is available on the relevant product pages online at www.item24.com.
With Machine Light Fittings available in five sizes, there’s a lighting solution for every machine. Everything from the most awkward corner to large cabins can be lit up. Thanks to IP 67 protection, the light fittings can also be used in harsh environments. They are fixed in place using a Line 8 groove, while an integrated hinge allows users to direct light where it is needed. When designing work benches, the Machine Light Fittings offer a space-saving solution for boosting lighting levels on the work surface.
Using the latest generation of LEDs, the fittings deliver clear energy savings and can also be combined with accessories including cables and electronic transformers. An ingenious system of power supply and control elements, cables and splitters makes it easy to configure customised lighting scenarios, even including dimmer functions.
Technical data for the various Machine Light Fitting designs is available on the relevant product pages online at www.item24.com.
Its pull is irresistible – the item Magnetic Holder!
For securely stowing metallic objects such as spanners, etc. on the groove of the non-magnetic aluminium Profile.
Magnetic Holder 8 can be fitted into a Profile 8 groove in next to no time.
Holding force F = 40 N
Our lightweight option for improved ergonomics – the item Pivot Arm 8 370.
This stable Pivot Arm can be fitted to an Upright on any of the new item work benches easily. The braking torque can be individually adjusted at each joint, enabling you to tailor the manoeuvrability of the Pivot Arm to your needs. The End Swivel Joint can be rotated 360°.
The Pivot Arm can reach approximately 370 mm. It can accommodate a maximum (vertical) load of 120 N.
What might be a tough challenge for others is no problem for this solution – Pivot Arm 8 80 370 heavy-duty can be used to safely reposition loads of up to 400 N over the table top of a work bench. The strongest Pivot Arm available from item can be positioned and moved with exceptional precision. Its adjustable frictional moment is consistent regardless of the direction of rotation. The grooves of the profile offer a whole range of fastening options for attachments and cable holders.
The connection can be made with either a horizontal or vertical profile groove. An end-face connection with Profiles is also possible.
All the joints can be rotated through 360° and their frictional moment can be adjusted.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.