Druckluftspindel

Application example of the month One simple usage of form of (material: AlZnMgCu1, 5 / EN AW 7075) Machine: HURON KX 30 Tool: Torus Ø4 mm R 0.4 Programmed feed: 30 m / min Programmed speed: 0 RPM Spindle: air turbine 848-026 with collet Chuck ER11 Compressed air connection Central on main spindle Druck 5 bar About the Central compressed air supply the air spindle is automatically interchangeable. The tool was first clamped and then measured in the machine with compressed air spindle. The nominal speed of the spindle is located at 80,000 rpm. This falls under weight on around 75,000 rpm. The customer could settle with this application in a very big machine with slower spindle with minimum tools.