Power Clamp

HAIMER MILL solid carbide end mills are reduced to the basics in terms of product characteristics. Therefore they offer a cost effective alternative compared to our HAIMER MILL Power/Alu Series solid carbide end mills, while ensuring the same HAIMER quality. HAIMER MILL solid carbide end mills can be used in almost all materials, especially for roughing and finishing.

With the HAIMER MILL Power/Alu Series end mill series, HAIMER can provide its tool holders with a universal solid end milling range for the universal use in different materials. All HAIMER MILL Power/Alu Series end mill s are fine balanced and by default equipped with the known Safe-Lock? pull-out protection from 6 mm shank diameter onwards. The HAIMER MILL Power/Alu Series is based on a pure high performance solid carbide combined with the most modern coating technology. The different innovative precision geometries are now available as 2, 3, 4, 5 and 6 flute cutters in different cutting lengths. Furthermore, different cutting edge designs (sharp, chamfer, radius, angle) can be selected depending on the workpiece requirements. In addition, a roughing geometry based on the new cord profile for machines with less power and applications with difficult chip removal, is available.

Advanced materials require advanced manufacturing. The continuing development of high-strength, lightweight materials such as titanium alloys, Inconel, and new aluminum alloys are eagerly sought by manufacturers in many industries, including aerospace and defense, energy, and transportation. These new materials present significant machining challenges in themselves. Add the competitive pressures in these global industries, and finding advanced manufacturing solutions becomes a top priority. Duo-Lock? - Pioneering technology Virtually unbreakable. For the first time, a modular milling system can achieve the similar high performance of the latest generation solid carbide end mills. To deliver groundbreaking joint technology, Duo-Lock? combines the innovative histories of two leaders in the world of manufacturing?HAIMER and Kennametal.. Duo-Lock? (Duo-?ock®; D-?®) maximizes a carbide tool?s full potential with productivity gains in both roughing and finishing. It provides high load capacity and rigidity when machining at high metal removal rates. When combined with high-performance cutting tools, Duo-Lock? provides more than double the metal removal rate in common milling applications. The Duo-Lock? technology The Duo-Lock? technology addresses the issue of the increasing cost of carbide by delivering a modular interface for cutting tool heads. Duo-Lock? provides maximum stability and load capacity through a proprietary thread design with a double cone bond. The results are unmatched precision and productivity, with a connection that is virtually unbreakable in the most demanding applications. Duo-Lock? cutting tool heads A variety of the newest milling geometries have become available with the new HAIMER Duo-Lock? system. The high-precision and extremely stable Duo-Lock? interface allows the use of the full potential of the milling geometries and achieves the maximum cutting depths at the same time. The cutting tool heads can be changed directly in the machine tool with highest repeatability in the Z-axis; therefore tool measurement is not always necessary. With the additionally available Duo-Lock? blanks in different length versions you can realize individual milling geometries for special applications.

During machining, specific demands for tool holding are laid down by each industry and application. The range varies from high-speed cutting to heavy roughing. HAIMER offers the right solution and clamping technology for all specific requirements. Therefore, each year we invest approximately 10 percent of our turnover in research and development. Our primary interest is to offer our customers sustainable solutions which enable a competitive advantage. This way, you can always maintain your competitive advantage in machining.

HAIMER evolved to an entire system provider for tool management around the machine tool. HAIMER Microset tool presetting technology complements the existing HAIMER portfolio of an extensive tool holding program, shrinking and balancing technology, tool management logistics as well as 3D measuring devices and solid carbide cutting tools. As a result, we can offer you a perfectly matching product range from a single source. The efficient tool presetting equipment from HAIMER Microset optimises your machining processes from the ground up. Improve your tool life, generate better surface finishes and boost overall process reliability in your production. Whether it is presetting, shrinking, balancing or checking and measuring – we offer the perfect solutions for all tool sizes and machine environments. Improve the quality and precision of your workpieces with our know-how and wide range of products. UNO series In addition to precision, speed and reliability, the UNO series also includes numerous features in terms of its equipment. The new design and improved ergonomics set new standards.

HAIMER evolved to an entire system provider for tool management around the machine tool. HAIMER Microset tool presetting technology complements the existing HAIMER portfolio of an extensive tool holding program, shrinking and balancing technology, tool management logistics as well as 3D measuring devices and solid carbide cutting tools. As a result, we can offer you a perfectly matching product range from a single source. The efficient tool presetting equipment from HAIMER Microset optimises your machining processes from the ground up. Improve your tool life, generate better surface finishes and boost overall process reliability in your production. Whether it is presetting, shrinking, balancing or checking and measuring – we offer the perfect solutions for all tool sizes and machine environments. Improve the quality and precision of your workpieces with our know-how and wide range of products. VIO series Optimise process reliability in your production with fully automatic measurement processes. The holistic device concept allows for integration in all production processes, including existing ones.

The spindle speed of modern machine tools have increased on a continuous basis in the last few years in order to achieve higher cutting volumes and machine in a profitable manner. The increases have also raised the demands for the tools and holders used, because the higher spindle speeds make the effects of imbalance increasingly more noticeable. The consequences are vibrations, bad surface finish and shorter tool life. Only the high-precision balancing of tools and tool holders can make the complete capacity of the machines tool with regards to speed, cutting volume and produced surface finish accessible. Because balancing provides for fewer vibrations. It reduces wear of the spindle and tool, reduces the downtimes and increases process security. With the Tool Dynamic balancing machine series, HAIMER offers a comprehensive solution for the balancing of tool holders, grinding wheels and big rotors with diameters up to 800 mm. Starting from the table and complementary machine TD 1002 to the automatic balancing machine TD 2010 Automatic, HAIMER has for every need the suitable balancing machine.

HAIMER tops off its portfolio as a system partner around tool clamping with its Tool Management, the complete solution for tool presetting and administration. HAIMER backs its workbenches and modules with specific solutions which have grown and matured over the years in their own production. The whole working area is specifically designed for tool storage, assembly and administration. All auxiliary materials are firmly established. All requirements have been thought of for an efficient and ergonomic working for tool management ranging from lighting to the dust bin. If desired, HAIMER will take over the complete functional design of working areas which focuses on storage, assembly, presetting and administration of tools.

The HAIMER 3D-Sensors are very precise and wide-ranging measurement devices for milling and EDM machines (isolated probe tip). They are clamped into a tool holder and inserted into a milling spindle and make it possible to position the spindle axis exactly on the edges of the workpiece. This allows for zeros to be set and the length to be measured quickly and easily. You may approach in any direction (X-, Y-, Z-Axis). When the dial gage shows zero, the spindle axis is exactly on the workpiece edge. Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt. No calculating of the probe’s ball diameter is necessary – just Zero it out! Problems with mathematics or calculations are eliminated, allowing for fewer operator errors. By using the HAIMER Centro centering bores and arbors is quick and precise.