584,830 active members*
5,964 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > What's the difference between the 1010-1 and 1010-4?
Results 1 to 7 of 7
  1. #1
    Join Date
    Oct 2006
    Posts
    79

    What's the difference between the 1010-1 and 1010-4?

    Hello,
    I have to replace a controller card on my 93 88hs. It currently has a 1010-4 card. Unless I misread the interchange chart (always a possibility) either would work in my mill. The 1010-1 is cheaper but I don't want to lose functionality. Could you tell me the difference between the 1010-1 and the 1010-4?
    Thanks, Shepard

  2. #2
    Join Date
    Oct 2006
    Posts
    79

    Re: What's the difference between the 1010-1 and 1010-4?

    oops, I think I did misread the interchange chart. I have a 1400-4 CPU so 1010-1 won't work.

  3. #3
    Join Date
    Apr 2005
    Posts
    1194

    Re: What's the difference between the 1010-1 and 1010-4?

    From 1992 up to the early part of 1994 fadal used a 1400-4 card with -3 software. You can use a 1010-4 up to a 1010-6 but not a 1010-1.
    We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout.

  4. #4
    Join Date
    Oct 2006
    Posts
    79

    Re: What's the difference between the 1010-1 and 1010-4?

    Thank you. Other than the jumper is there anything I need to do to swap in the new card? Seems I remember something about parameters being stored on cards... Ill look it up but if you know off the top of your head I'd appreciate it.
    Thanks

  5. #5
    Are you Shepard629 on ebay? i just sold a 1010-4 today.

  6. #6
    Join Date
    Oct 2006
    Posts
    79

    Re: What's the difference between the 1010-1 and 1010-4?

    Yep, thats me. Sorry I didn't catch your post. Its been a bit since I visited the forum. About to install the card and see if I can get running again.

  7. #7
    I forgot to pull the eproms, replace eproms with yours and reset jumper for your axis

Similar Threads

  1. Replies: 2
    Last Post: 06-26-2014, 02:07 PM
  2. Looking for 1008 or 1010 low carbon steel
    By orangelss in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 05-11-2011, 06:34 PM
  3. Milling Slot in 1010
    By gpraceman in forum 80/20 TSLOTS / Other Aluminum Framing Systems
    Replies: 1
    Last Post: 06-24-2010, 01:41 PM
  4. XYZ 1010 with Siemens 810D
    By Haydn in forum SIEMENS -> Sinumerik 802D/808D/810D/828D/840D
    Replies: 1
    Last Post: 05-19-2010, 05:34 PM
  5. A16B 1010 0040
    By gglynn81 in forum Fanuc
    Replies: 2
    Last Post: 05-18-2008, 04:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •