Hello All,
I just acquired an 1995 VM-20 with the centurion V. The spindle drive comes right up and is showing no faults on its screen. The 3 axis drives have no leds lit as if they are off?

I have 308vdc at the big blue cap and all the fuses check ok.
There is 24vdc between #12 and #22.
I checked power supply and the voltages are correct going into the boards.
Any suggestions of what to check next?
It has the glentek sma 8215 drives in it.

Thanks Seth


Sent from my SPH-L900 using Tapatalk 2