[raysul]

Hey guys need some info to get me started. Kl-vfd15 I can't seem to get it working. I have power, and have a Flashing display of A5R 1.0 5 could be a "S" but not sure. Only button that work's from here is the prog button, which then give's me flashing PD000, press prog again then i can use the arrow up and down buttons to change PD value. I can use the button >> to change digit postion and then arrow up down buttons, and that's it.
Is their a combination of buttons together to push? don't know what the Jog button is for either. In info to enlighten me would be great.

Ray

[Al_The_Man]

You don't have a manual?
What is the make of the VFD?
Al.

[raysul]

Afraid not didn't come with a manual, although i was sent a pdf file, after i sent a message to keling support, but that's not helping me, it talks about pressing Enter, will this unit doesn't have Enter. So i guess the pdf file is genric.
For the make of the VFD have no idea, it only has KL1500 stamp on the front.

Ray

[jalessi]

Ray,

Does this look like your VFD?

Jeff...

[raysul]

No it doesn't look like that. Where you have F/R button, mine is a Jog Button. Where you have a Enter Button, mine is a Set Button.
Also only my Power light come's on, the other's haven't come on at all as yet.

Ray

[raysul]

Ive borrowed this from the woodwork forums. It's the best that i can find. At least it looks the same as mine, from what i can see.

[jalessi]

Ray,

I believe this is the model you have.

[jalessi]

Ray,

Here is the setup documentation.

Jeff...

[raysul]

Jalessi, thank you for VFD file it will be alot of help further down the track. But I really don't understand why, I can't progress any further than i have. Except for pressing the "Set" button and the Arrows up & down buttons i can't enter any other information into VFD. Pressing the other buttons don't have any effect on the unit. I had assume at factory settings the spindle should work, but it doesn't, I simply can't get passed a flashing digital readout. Am i missing something here??

Ray

[Al_The_Man]

If you bought this new, I am surprised if you did not get a manuf. manual?
All the VFD's I have worked on, a flashing display usually means there is an error of some kind or that something illegal operation is being performed?
Al.

[dcolo]

jalessi,
I am looking for a manual on how to set up my KL-VFD15 as well. The Zip file you posted, is that for the HY02D223B model VFD? or is that for a KL1500VFD?

[jalessi]

jalessi,
I am looking for a manual on how to set up my KL-VFD15 as well. The Zip file you posted, is that for the HY02D223B model VFD? or is that for a KL1500VFD?

Dcolo,

See attached PDF for KL1500VFD manual.

Jeff...

[mactec54]

raysul

How have you wired the input terminals, can you do a photo

[dcolo]

thank you so much! We are in the process of setting our table up now.

[mactec54]

dcolo

What is the spindle Hz 400 or Hz 300 & the spindle motor Amps, Post these to numbers, & I will post all the settings you need