[cinematic2]

Anybody interested to build thin metal cutting machine?
Or Direct Metal Laser Sintering (DMLS) 3D printer?
Have Synrad Evo 240 (280W measured) for sell.
Complete with 2xRF3000 and 2x AC/DC Power Supplies and UC2000 Controller

Also another set of RF3000 and AC/DC

[gnapple]

Anybody interested to build thin metal cutting machine?
Or Direct Metal Laser Sintering (DMLS) 3D printer?
Have Synrad Evo 240 (280W measured) for sell.
Complete with 2xRF3000 and 2x AC/DC Power Supplies and UC2000 Controller

Also another set of RF3000 and AC/DC

Do you have interest for mixed laser cutting machine? Parameters as follow:
Seven advantages:
Can cut Galvanized sheets
Can cut mirror finished stainless steel
Oxygen consumption can be as low as 0.2 Mpa
Can keep continuous cutting
Automatic anti-collision function of laser head
American HM untouched following system
Full servo system, ball screw transmission structure

Working parameters
For stainless steel
Speed
(mm/s) Power(%) Open delay (ms) Dot Interval(s) Oxygen Mpa
0.4mm 40-50 85-95 % 400-600 400-600 0.2-0.4
0.6mm 40-50 85-95 % 400-600 400-600 0.4-0.6
0.8mm 30-50 85-95 % 400-600 400-600 0.4-0.6
1.0mm 20-30 85-95 % 400-600 400-600 0.6-0.8
1.5mm 20-30 95-98% 400-600 400-600 1.2

For Acrylic
Speed (mm/s) Power
Open delay (ms) Dot Interval(s) air
3mm 25-35 80-90% 0 0 0.2-0.4
8mm 8-15 80-90% 0 0 0.2-0.4
12mm 4-8 80-90% 0 0 0.2-0.4
20mm 1-3 80-90% 0 0 0.2-0.4
25mm
30mm




For galvanized*plate

Speed (mm/s) Power
Open delay (ms) Dot Interval(s) Oxygen
0.6mm 40-50 85-95 % 400-600 400-600 0.8-1.0
0.8mm 30-50 85-95 % 400-600 400-600 1.0-1.2
1.0mm 20-30 85-95 % 400-600 400-600 1.0-1.4
1.2mm

If interest please contact me.

Rgds
Apple
EETO Machinery Co., Ltd
Office 1401, Building B3, Wanda Plaza, Economic & Technology Development Zone, Wuhan, China
Tel：400-027-1897 Fax：027-84618501
Mobile: +86-15527861820(Whatsapp Available)
Web：www.eetomachinery.com
E-Mail：[email protected]
Skype: lovelx0226