584,800 active members*
4,822 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2009
    Posts
    91

    Solidcam 2014 PROBLEM

    Hello Guys

    I have problem when i want to generate 5axis G-code alarm occurs see on the picture below.
    The machine is DMU 50evo.
    This happened only when i want to generate 5axis simultaneous G-code,with 3axis and 3+2 axis i haven't problems.
    Any ideas?

  2. #2
    Join Date
    Oct 2013
    Posts
    64

    Re: Solidcam 2014 PROBLEM

    Mybe a postprosessor problem.

  3. #3
    Join Date
    Oct 2007
    Posts
    499

    Re: Solidcam 2014 PROBLEM

    In the Machine Control tab set "Machine Limits" to "'No limits'. However, if your vmid file and MachSim truly reflect the kinematics and axis limits of your machine you may find that the machine alarms out when you run the code. Also you may need to use the alternative angle pair if the CAM job is taking your tilt axis the 'wrong' way.

  4. #4
    Join Date
    Sep 2009
    Posts
    91

    Re: Solidcam 2014 PROBLEM

    In the Machine Control tab set "Machine Limits" to "'No limits'. However, if your vmid file and MachSim truly reflect the kinematics and axis limits of your machine you may find that the machine alarms out when you run the code. Also you may need to use the alternative angle pair if the CAM job is taking your tilt axis the 'wrong' way.

    I try but the same alarm occurs.Any other idea?

  5. #5
    Join Date
    Oct 2007
    Posts
    499

    Re: Solidcam 2014 PROBLEM

    As I said, check your MachSim model and the vmid file. There may be a discrepancy between them. Also, there may be an issue with your post processor that is related to the vmid file.

Similar Threads

  1. SolidCAM postprocessor 2014
    By solidcamx in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 4
    Last Post: 12-08-2015, 07:01 PM
  2. Solidcam 2014 sp1
    By imachining-6061 in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 5
    Last Post: 12-02-2014, 04:47 AM
  3. G code SolidCam problem
    By zambrano in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 3
    Last Post: 11-21-2013, 11:55 PM
  4. SolidCam Radius Problem
    By CNCOX in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 4
    Last Post: 11-10-2009, 05:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •