How can I change Machining Configurations in an existing Featurecam program?
How can I change Machining Configurations in an existing Featurecam program?
i would think go to manufacturing machining configs then it should have a config with the file name
ive got mine set just how i like and if you have your speeds n feeds set up with ur mat library like i do the only thing i have to do is select my tool and its done
CHOCLATE? THIS IS DOODOO BABY!
If I program a part for aluminum and later want to do the same part in tool steel I want to change to a different Machining Configuration. I am not able to change the Machining Configuration to anything else in an existing file.
I see it can be done with Delcam For SolidWorks but I do not see how it can be done for Featurecam.
https://www.youtube.com/watch?v=iFuHOuvxaks
i would just open the file
part view
stock and just change materials from alu to tool steel
speeds and feeds are set up in the material library
depths of cut, leads, finish allowances are in machining attributes
you might have to set up a different machining config for harder materials and also swap that out with the material data
CHOCLATE? THIS IS DOODOO BABY!
Changing your Material and/or Machining Attributes will change your default settings. If you made any changes while writing the program, those will not change. Youll have to manually change them again. Anything with an * next to it in your properties, or speeds and feeds that have the override checked, have been changed manually.