Have you updated the driver for the new version? I believe you would go to windows devices and find k-flop under usb. Select update driver and select the new one from kmotion 510. Not sure if that...
Type: Posts; User: bhurts
Have you updated the driver for the new version? I believe you would go to windows devices and find k-flop under usb. Select update driver and select the new one from kmotion 510. Not sure if that...
Did you open kmotion.exe go to the configuration and flash screen and flash the new version into k-flop?
Sent from my E6910 using Tapatalk
Tom
Thank you so much! That seems to be working perfectly. If you think it's worth it you may want add that line to the example toolchange program. This will be added to all my other machines...
I appreciate the advice Servtech and may consider emptying the spindle before shutdown. I still need the machine not to make unnecessary tool changes. I have been a machinist for around 25 years now...
Tom
Thank you for getting back with me. I am attaching the c program here as a .txt file.
I have looked it over and have been trying to figure it out with no luck so far. If we can get it working...
Tom
I have been using the linear4toolholders
C program adjusted for more tools to match my setups on 3 machines. Everything works great but I would like to prevent it from dropping off and...
I have finally gotten the files to download so please scratch that last post. Thanks
Sent from my E6910 using Tapatalk
I absolutely love kflop etc. This new board looks very promising. I will have to try on soon. As as always thank you for the innovation and support.
Ben
Sent from my E6910 using Tapatalk
Hi mmurray70
I have been trying to download your c programs but can't seem to get it to come through. Would it be possible for you to post a screenshot of your toolchange program. I really only...
I got everything all sorted out. I had a extra ground causing issues. Rock solid now.
Ben
Sent from my E6910 using Tapatalk
Thank you for the replys. As to the USB not working this is machine 6 and they all use the same control. The first one was over 10 years ago and still runs every day with no problems. All the...
Tom
I have a unusual issue I have not seen before. This is my sixth machine with dynomotion. I have had the USB disconnect issue in the past and it always resulted in the board resetting. I have...
Thank you Tom. I will give it a try and report back in case anyone else has the same drives.
Ben
Sent from my E6910 using Tapatalk
Thank you for your advice Tom that took care of most of my issues. I have 3 rutex rt990h drives sitting around and was wanting to hook them up to k-flop for testing. Once again and sorry wiring the...
Before I go any further with the dual loop I have a bigger issue.
My snapamp blows the breaker for DC power instantly if power is applied to side 1. Side 2 seems to still be working. I don't know...
Also how will this effect limits and soft limits?
Thanks
Ben
Sent from my E6910 using Tapatalk
Just giving this a bump and adding a few things.
Do I need to change the input gain on channel 3?
How would I add this to the initialization program once it's working? Do I just add the program...
Here are the screen...
I am running snapamp with 3 dc brush servos with shaft encoders. I hooked the glass scale to channel 3. Input encoder snapamp 11. No output. It will be driving channel 0. Snapamp channel 8 input and...
Tom
Is there anything I need to add to the initiate program to be able to use j5 or will just disconnecting it from kanalog allow For it's use.
Thank you
Ben
Sent from my E6910 using...
Thank you again Tom. I had a bad feeling about how things are wired. Glad you corrected me.
Ben
Sent from my E6910 using Tapatalk
Thank you for the reply Tom.
I hope I have this straight for wiring. The step pin and 3.3 v will be wired to the step pin in the drive. The step not pin will go to ground. The same thing for the...
Tom
I have a new project but have no experience with step direction or how it's wired. I have two pictures that show what I have to command the servo drive with and the step direction...
Try disabling them and see if the problem persists.
Sent from my E6910 using Tapatalk
Do you have a stuck limit switch possibly?
Sent from my E6910 using Tapatalk
Thank you Tom. I think that will do exactly what I want. I will test it out and let you know how it goes.
Ben
Sent from my E6910 using Tapatalk
Thanks for getting back with me. The files you requested should be attached.
The air to the machine is turned off with a manual ball valve. I had it turned off when I ran the program. When I...
Tom
I am having a few issues I need to address concerning my linear atc program and other safety features with a tool changer. I was running a program and it went to make a tool change and it...
I copied this from the wiki and it shows the error I was referring to.
// Move Axis XY at specified Speed and wait until complete
// return 0 = success, 1 if axis disabled
int MoveXY(float x,...
Tom
I used the program in 435.d. The line I am referring to is not shown in what you posted. I will try to get a screenshot of where I found the issue and post it this evening.
Thanks
Ben
...