Search:

Forget that linked page. It is a ploy by corel to get you to buy a upgraded version.

YES..Corel Draw X5 runs on both WIN8 and WIN8.1 but follow my instructions i have already posted

The academic version will only allow you to load onto ONE computer then it is dead.
If you want to load onto another computer you need to totally delete Corel X7 from the existing computer (bit hard...

Ok guys im back with good news

Corel Draw loads on both WIN8 and WIN8.1

On WIN8 it actually appears to stall at 66%-71%...once it does that simply leave it loading for about 1 hour and then...

Hi Mate

I had this very same problem 12 months ago and heaps of guys on here helped me out..

But basically you are not going to like what im about to say..but it is exactly what i did and my...

Well i can confirm 100% that I got X5 to load on win 8.1

I will be trying to load x5 on another computer a little later than only has win 8....

i will let you know what happens and /of if i had...

Ok i know this is probably the wrong section to post this problem...
But as im comfortable here and a few guysw have helped me out i thought i would try.

Moderators please bear with me...im not a...

Hi Walt

See your PMs

Is this the WALT that helped me out many months ago???????

Yes Thank You. But all I have at present is PHOTODRAW 2000 & Print shop 22 and neither have the facility to save as DXF or AI
So I thought it best if I invest in the Corel Draw x5 as many of you...

Thank You.

So you mean I need to uninstall lasercad as I have it active at present.
Then install Corel Draw X5 first. Then reinstall Lasercad to get Corel Draw to recognise Lasercad
Am I...

Yes I did. And I visited the Rabbit site but could not find any tutorials....

Ok Guys. I just purcgased corel draw x5.

Now somehow I believe I can bypass using the current Lasercad restrictive software and simply connect corel draw to my laser. I only have a baby K40 laser...

Looks like I have no choice but to buy coreldraw x5.
But corel draw products are so overpriced for their software

Anyone got another less expensive option for software...If not then i guess im...

Also is there any LASERCAD Tutorials available anywhere?
This would probably help me better

Hi again guys...its the little Aussie Girl back yet again with a question.

In the lasercad software it only allows you to draw SQUARE and ROUND shapes.

My question is how do i import a shape...

Oh! GOD.

All you should really be concerned about is the Cut Speed..Cut Power....Engrave Speed..Engrave power..

Your settings numbers didnt come through during your last post...

but if you...

not sure of what software you are using or which controller your machine has..

however because of guys on here guiding ive come along very quickly with laser engraving & cutting...

so whever...

Now Now...settle down....LOL
Ok..i will allow to you to gloat

Just this time though....LOL

Email sent..

Why are you guys so good to me...LOL

This is exactly what a good forum community is all about

Many Thanks
BELIN

here is 2 roughly drawn diagrams...

the first one is how it was before i broke the guide wheel (perfect)

The 2nd is showing how the laserhead is a bit offline

i think this is certainly a...

i have aligned my mirrors to almost perfect...it is a very tedious job...but i think im extremely close...

I tested it out and did a cut through 4mm perspex and at the top left it cuts straight...

ok cool

i will check the OPTIONS area on the Controller after it starts up....

Im certain its me who has overlooked a setting.

im almost sure all DSP controllers have similar functions...

Im using a DSP AWC608 controller & Lasercad v6.39 software

And i have limit switches placed at points for both X & Y axis

Im betting there is a setting somewhere I have not enabled or set
...

Just a hunch....but would it have something to do with the USB COM PORT setting..

such as locating and setting to COMM PORT output to the software...

just a thought as i needed to do this...

Yes its me again...the little aussie girl just with a question about something im obviously not doing right when it comes to a setting for the X & Y axis to be set at a certain point when you turn...

i have reset the mirror alignments to the best of my ability...it may not be 100% perfect but it is sure extremely close...

I will take a look at the table hieght...thanks for that

Come on Guys

This is the 2nd thread this spammer has started in 3 days and its a identical thread.
Is this really tolerated here?????

you guys are just great

whenever a poor little aussie girl is in distress , i can count on you guys to help me out...

absolutely fantastic...

You will excuse me if i dont take you up on your BET....LOL

my bet is your Bet is accurate..

I will be testing this out within the hour

Thank You

good idea...i will give that a try this morning when i get to the workshop...