Search:

We have two different model KMB1 and KMBI. They look the same but are different. We are getting rid of these machines. I will sell as one lot or certain parts.
I am using a friends contact info...

I had it up too 1100 rpm, material was anneled but not normalized . Went with a slower rpm due to chatter problems you are right at a slower rpm the material tears instead of cuts. I guess next time...

1.5 major

I am using a canned cycle 4140 mat. tried diffrent rpm's settled on 450 . had to pull the job. sent out to be rolled. I could get 1 pc. on a fresh insert. then chip out and loose the pitch dia. Tried...

I am trying to cut a 6 pitch thread on a cnc lathe with an 8" chuck
(hurco tm-8) every time i get to minor diameter with my tool the insert chips.
Have tried all the somewhat obvious problems ,...

I just bought a hurco vm-1 and love it totally conversational or g-code , holds great size and you can adjust surface finish in an optional parameter all this for 38,000 new

if you are ever looking for any parts I have 2 of these machines intactact collecting dust.

scam... scam.... scam..nothing good to say about it was a member when I first started this insane business of my own shop . spend alot of money to become a member. Quoted lots of jobs didn't get one....

thanks Wiz a big time saver!! now I don't have to go to the cam system for a simple face and turn operation with an angle or radius .
Joe

never ran a cincinati what kind of control? I usually set 1 tool as a z-zero base in a work offset page and then set all other z offsets in the geomerty page. as for x always have set offset in...

called fanuc right off 7 day turn around ,still searching got chips to make, in jeopardy of losing job in machine now. older machine 1990 hurco hence the problem fing a motor.........
Joe

We are in need of a Fanuc AC Servo Motor bad. PArt # A06B-0513-B003. Anyone have one or know a sorce for one, we would appreciate anything. J

Help Please,
I have always used g41 or g42 in turning to get my angles and radii to come out to print. However I have purchached an older machine which does not have tool radius comp option.

I...

I am a huge fan of trim sol I get mine from j&l industrial supply no bacteria no nasty smell provides good capibalities for both turning and machining centers. Works well for tapping. I run alum....

drill a 3/4 inch hole and check the retract amount i.e. tthe amount the bar moves in x minus to clear prior cut I would use a 5/8/ carbide boring bar(given the 4 inch depth)for rigidity. Retract...

I can say from my time in the industury that the guys most sought after are the ones you are well rounded i.e. manual and cnc I have a shop in milwaukee and cnc button pushers (a guy/ gal you can...

thanks guys I found the problem today a bad wire to my encoder as soon as I fixed the frayed wire it worked fine. Back making parts. I guess I learned a lesson getting a used machine at a bargin...

thanks ghyman I entered in the info given it did indeed make a thread but the but the pitch was so fine it wiped out the major diameter!! I can get the pitch correct with a g32 but the threads come...

I need help with threading issues... I want to make .485-18 un-2a thread with a major tolerance of .485 to .478 and a minor tolerance of .448 to .443.
I have a fanuc O-T control. Could someone out...

I think that it might be a kerney and trecker it's hard to get a good idea with the pic's provided

I have always just used a squirt bottle on the blade a couple of squirts once and a while will work wonders... I also mount a steel or brass brush to wipe the chips off the blade (some where behind...

there are alot of diffrent machines esco which is a swiss type machine i.e. the tooling moves not the stock. there are greenfields and new brightons which are six spindle machines and the stock...

I started out in the industry on screw machines as far as hands on experiance you can really learn alot in running one but as psychomill stated the best way to learn is HANDS ON . In running and...

thank alot daryl i sent e-mails to the shop and see if they will help I am getting sick of converting fpm to fpr I do about 10 set-ups and programs a day all small runs and this is costing me time...

that would be great camcrash sounds like we have the same machines mine also is a galaxy.(1996)

the spindle does have an encoder. I tried the G95 contol says the code is invalid.I always use css (unless I am threading or grooving) I think just a G-code list for the O-T control would help if...

Hello fellas,
Iam new to the site and love it...... I recently bought a tong-tai lathe (hatachi-seki off chute) at a bargin basement price. It did not include any manuals. I am having a problem...