Hello guys,
I'm having an issue with a tool that is cutting the wrong side when it comes to cutting a curve.
For better understanding, please review the pictures.
1st picture is from...
Type: Posts; User: crolee
Hello guys,
I'm having an issue with a tool that is cutting the wrong side when it comes to cutting a curve.
For better understanding, please review the pictures.
1st picture is from...
I just played with iges file...basically it does't have any effects on the faceted surfaces.
Instead, operation parameter, ie Total tolerance plays the role here, it seems(I'm not sure if this will...
I see, let me check this and report back, thank you for the input!
Hi all,
I've been using Solidworks 2014 to make 3d models and then export them to Mastercam X5 for about 4 months now.
Recently, I noticed that when I export SW to MC, the surfaces when opened...
Excellent point!
As soon as I read your reply I realized what's wrong(with me) and got it posting correctly, thank you!
I was running the spindle CW due to the insert(CNMG-432)...which is facing...
Hi guys,
I'm using Mastercam X5, and trying to setup a new lathe machine(Vertical. Right turret, I think) in it.
I made a few simple rough cuts to set up the tools, etc, and it looks good when I...
Hi Ray,
Thanks for your input, the file I attached has the solid stock(starting stock) and solid model(end retsult that I need), and I set up these myself in this case.
My question was how best I...
Hello,
I have a quick question on Surface Rough in Mastercam.
Could any one take a look at my attached file, it's Mastercam X5 version.
When I use this Surface Rough Pocket, the tool cuts in...
Thank you Superman for the input, I really appreciate it.
To see if I'm doing this correctly, I've made following main and sub programs. Could you look at them if they're ok?
Main:
%...
Thanks for the input!
So you mean I should create the subprogram in something like Mastercam X Editor or Cimco, but not directly from Mastercam?
To further my confusion, I read an article say that on Fanuc the subprogram has to be an external one to be called by M98. Is it true? And I don't seem to be able to find this option on MasterCam X5.
Hi all,
Due to memory limit on the Viper 1270 VMC with Fanuc Oi-M control,
I have to use subprogram for the first time. I rotated a cutting operation 3 times at 90 degree each(total 4 cut...
thank you for the reply.
I tried a few options here but can't get quite what I want.
So I'll try a few more things and see if that does the job.
I've been playing with the Retract/Feed plane...
Hi guys,
I've posted some questions in the past and got all of them answered.
Due to my laziness I didn't personally thank each one of you that answered and helped me.
I learned a lot from you...
This leads me to ask you another question: How would you control the start point in operations like Surface Finish Constant Scallop?
I tried your method and it didn't work out...I've been trying to...
I never knew that, thank you!
Hi all,
I'm just wondering what would be the best way to cut something like this(attached).
I've been using Contour(3D) in these kind of ops, but looks like there's no control over where
the...
@cadcam Sounds nice, I'll try this thing myself. Hopefully I can generate the same beautiful surface as you did:) Thank you so much!
Wow, very good. Would you be kind enough to how you selected each chain?
I tried this 'net surface' and didn't come out like this one. Thank you! -Ken
Hello, just added two more files, Thank you!
Hello, just uploaded the file for your review, any inputs mean a lot to me... Thank you.
Hi there, the file's attached! Its Mastercam X5.
Thanks!
Also added in:
PRE X files and IGES file formats
Hi there,
I am trying to create a surface, can someone help me achieve this?
With "Surface-Net", I was able to create a surface, but this surface doesn't have the contour I need.
I tried a...
Tried that and looks like it works much better. Thanks a lot!
Hello All,
I need to machine a part with a slot whose wall is sloped at angle.
For this slot(through hole), I tried a few Surface Finish Finish methods(Surface Finish Contour, Surface Finish...
Hello,
I'm cutting some surface shape on Haas VF-3 and I need some help.
Up until now I haven't cut surfaces and after a few tries, the Surface Rough/Finish Parallel seems to fit the bill. ...
Hello,
I am trying to add some solid to body to existing solid body.
In the picture below, I need to add some solid to be like red outline(doesn't have to be exact size) so that the solid...
Great!
Would you tell me how to create the arc in detail? That's what I was having trouble in drawing. I couldn't get the arc end point to touch the both chains.
Maybe I need to create a new plane...
File attachement
Hi,
I have this question on surfacing...have been using Mastercam for quite sometime but never figured out...
What I've been trying to do is to create a curved surface along two chains(file...