Update: This build went very well and is still running today and has received some minor upgrades since.
-
Type: Posts; User: gbowne1
Update: This build went very well and is still running today and has received some minor upgrades since.
-
Thanks for the welcome back.
I would only reccomend this upgrade to those with 3 5, 10/11/12 controls or possibly 0's or for those on a budget.
It's just another option. The boards, etc. for...
Hey everyone!
It's been a while since I posted a build thread, if not to help others find the right boards, etc. to finish and or upgrade their controls, especially if they have the A02B-0094-B502...
We are still taking drilling jobs. Especially on parts that are smaller than 6" x 12" x 16" (152.4mm x 304.8mm x 406.4mm). No exotics. mostly Aluminum and Steel.
We prefer parts that are 1018...
This link is dead.
I'm almost completed my 18T Model C. However, the A16B-1212-0871 PSU B1 seems to have a empty space between the MAIN CPU FS18 board and the PSU. I'm a bit new to these. Anyone actually using this...
I don't know however.. Hitachi Seiki - New, Refurbished and Used Machinary and Parts
Please see the update to this buid: https://www.cnczone.com/forums/showthread.php?378576-FANUC%200%20Model%20C%20Build%20(FS0C)
I am putting together a parameter list for 0T's that will get you started. They will need to be edited to suit your machine. They will not include option paramaters.
Need help identifying these boards: Can anyone tell me which systems these go to?
AD AXS (P, P) A16B-1210-0420/05B
ROM A16B-1200-0150/01A has 12ea M51 chips
ROM A20B--0008-0480/02A has 24ea...
I wanted to update everyone on my current FS0 Model B build from past history. Some of it has changed quite a bit from previous.
Control Unit: A02B-0091-B501
Master Board: A16B-1010-0286
PSU:...
It's the next generation of what used to be called FAPT. but it has a lot more functions than FAPT did as an automatic programming tool (APT).
I ended up going with 2.59845" diameter bores. Piston to bore clearance is about .0035" and used a valve at .0.866" dia.
Here is a update to the I/O portion of the build, most of the modules you will need are Digital and 16 point
I/O Unit B: A03B-0807
Backplane: A03B-0807-C01A ABU10A 10 slot I/O Backplane
I/O...
No, I didn't give up on the 6. I've just been updating all my controls and collecting parts for more builds. This is meant to be a guide, so a person would have enough parts information without...
I wanted to update everyone on my current FS0 Model C build from past history. Some of it has changed quite a bit from previous.
Control Unit: A02B-0098-B511
Master Board: A20B-2000-0170 ...
I have been trying to find FS16/18 Model C Main CPU and both option boards for less than $1,700 ea. Even just a bare CPU board without the cards.
Anyone out there have parameters for any lathe...
Siemens parts are usually a lot more expensive than FANUC on eBay. Centroid would be ok. Just going with what the user wanted. The 0i controls are common and not terribly hard to work with and...
This is a post I made primarily to show it could be done and what hardware to use, so someone could use it as a reference. It's not my machine, but I will try and gather photos and add specifics to...
A friend of mine has a old Tormach and considered doing a retrofit of the control to a FANUC Oi. So I thought I would get the ball rolling help him choose the basic parts necessary to do so.
...
415990
415992
415994
Here it is, I started with a FCA 335M. I still don't have the Meldas Mazatrol Paramater disk that goes in the drive. I figured I may just write my own paramater set and...
So that anyone who wishes to build or retrofit their machine or control can add the proper parts. All available on eBay.
FANUC A02B-0228-B503 Build
Here I will document my FANUC 18T Model C Build
Backplane:A20B-2001-0190/01A
Chassis: A02B-0228-B503 (4 Place Backplane) dated 1997-09
Power Supply: A16B-1212-0871...
I've got a 1990's Fadal VMC-3016 Standard Model. Has a 7,500 RPM spindle and the 88HS.
The book, on ppg 11 says there are two different Orientation Bridge assemblies. ORB-0001 or ORB-0002. At...
I am looking for someone to fill a CNC Programmer need for my small (but growing) machine shop/job shop. About 6 months ago my CAD &CNC programmer left his position here at my shop so I need to fill...
Yes.
They were already sold. I kept 1 each of the boards.
Yes, I do. Still have not completely inventoried that stuff. It was separate from the lot of stuff I received.
Anyone out there have a little time to do a few drawings for me from some dimensions so that they can be machined.
They can be in CATIA, Solidworks, AutoCAD.. as long as I get the resulting .DXF,...
I always wondered if there was a way to display and/or calculate the dimension in both Decimal Degree and DMS units. For those people who read drawings in both units, or don't want to take the time...
I will look and see if I do. I'm working on hooking up mine to the control.
Bump...