Thanks, really appreciate the help.
Type: Posts; User: AJ961
Thanks, really appreciate the help.
Thanks djr76. I will do that. I have another question.
I've programmed the ID threading for these bolts with M30 at the end. If I understand correctly, M30 will return to the starting position....
I have a few bolts that require 9/16-18 3B internal threads. I decided to try threading on the TL-1 lathe but something is not quite right.
Drilled bolts with 33/64 bit. I input the data such as...
I'm confused why both have to be input in the IPS screen when performing functions such as OD turn. For instance; If I decide I want .005" feed per revolution and am using 100 SPM, but then change to...
Thanks djm
I need to purchase 3 boring bar holders and can't find one for the Haas TL-1 automatic turret. Anyone know a good source for them?
Thanks,
AJ
I
Thanks. It sure is nice to have descriptions for each program.
Get to spend a few hours per week on the Haas TL-1 Lathe. I've created a few programs, all which are saved in IPS with the required names such as o00261. I'd really prefer to have actual names for...
Thanks LeWhite. Hopefully I'll have time to get on the lathe this week. I didn't realize there is a tool offsets/taper page. I'm also not sure what you mean by using a U instead of X. What is the U...
Thanks anyway Billetgrip. I cannot find anything in the manual in regards to cutting a taper other than chamfers. May have to give Haas a call.
Thanks. Would this would be done in the IPS on O.D. turn tab or maybe OD Chamfer?
After going through the IPS and researching online I cannot find information on how to cut a taper on the TL-1. I may have to manufacture a taper pin for work in the next couple of days and would...
I don't remember an option to program a taper in the IPS. Appreciate any guidance on this.
AJ
Thanks for the info Ydna. Truly appreciate it.
Thanks for the help, I'm a bushing making machine now! :banana:
Thanks Viking. If I remember correctly, after pressing f2 nothing happened. I'll take another look tomorrow. Really appreciate the response.
AJ
I'm extremely confused with the "x dia. measure" feature. I sure hope someone can enlighten me as I've spent the best part of the day on this. I have a gang tool set up on the TL-1 lathe with 4 place...
Had a spare 20 minutes to play with the lathe yesterday. After homing all axis, setting the offsets and filling facing information the face program worked fine. Got busy and had to leave it.
Few...
Hello,
I work in the aircraft maintenance field and have experience with a CNC mill and learning on a new CNC Hass Lathe. Happy to have access to this resource!
AJ
Thanks for the reply Wildman. I did set the offsets. After receiving the x316 message the first time, I restarted the lathe, zero'ed all axis, and set offsets accordingly. Entered face tab, entered...
Have a new Hass TL-1 but am experiencing a problem.
Following the manual, step by step, I keep receiving the following message when trying to run an MDI "face" program: "Haas Alarm: 316 X OVER...