Search:

sounds like I have the same machine, I do have some manuals let me know what you might need and I can take a look.

[email protected]

I received a test procedure from FIVES when I was trying to see if I needed a new ball screw or what on my sabre 750's I would send you a copy it might help.

what is it you are looking for? I have 2 here one with fanuc motors and one with siemens.

yup was trying to find some help, someone said to plain of a title and to repost so I did. But I got it working.

Got it figured out!!:banana:

Im located in Red Wing Minnesota.

yes and did nothing

On my sabre 750 when I got to turn it on it just sits on the start up screen. After looking in the back I see only half my I/O rack looks to have power, where do the cards get there power from?? I...

They are all fine along with all the fuses I could see. I am only seeing the first half of the I/O board coming on not sure if the back plane or what powers it.

I have a sabre 750 with acramatic 850sx control, with fanuac drives. my problem is when we went to turn the machine on Monday morning it starts and just sits on the start up screen and does nothing....

I have a Cincinnati Sabre 750 with a Fanuc spindle drive. The problem we are having is that the measured speed isnt the same as the comand speed. at 2000 rpm's it is really close and it gradualy...

We have a CX20 with auto thread, and when it goes to thread the wire the water jet dosent always come on before the wire goes thru the lower head. It seams like it is half way back to the cutter...

I have a Cincinnati Sabre 750 and it is giving us intermittant 15901 SPDL ORN FAIL. It only does it on certian tools (ones used to Rough out metal). It has done it on different programs that we...

My cincinnati talon with acramatic 850SX wont start up. The screen just says everything passed and it just sits there. In the back watching the lights they look normal but i do not no the sequence...

FYI the wire from the aspirator to the machine had worn thu inside the transition tube. I cut and spliced togeather and works again

I have a Mit FX10K and when it goes to auto thread is starts and the wire gets to the aspirator and alarms out. If the operator is there and hits stop and does a manual feed and manual collect to...