Search:

You can open a ticket in our website and we will give you a hand with this:
https://cnc4pc.com/contact

Arturo Duncan
https://cnc4pc.com

Many people upgrade from NC Studio to Mach4 with the C25XP. Jinan used to offer the option and we would ship the boards to china, but they complained that the taxes made this not viable. I think...

The big advantage of the KFlop as that you can write code that will run in real-time on the motion controller. We have used it for a couple of projects and worked very well and the support from...

Check out the C25XP:
https://cnc4pc.com/c25xp-smooth-stepper-integrated-board.html
It is very simple to set up, has all the features, and also expansion capabilities.

Arturo Duncan...

Upgrading this to Mach3/4 is very simple:
https://cnc4pc.com/blog/post/upgrade-richauto-to-a-c25xp

Arturo Duncan
https://cnc4pc.com

You got it working for now, but I can assure you that you are going to come back. So plan ahead. Maybe getting a simple UC100 and upgrading to UCCNC would be the simplest way out:...

This is how this is done:
https://www.cnc4pc.com/blog/post/configure-an-step-and-direction-servo-as-spindle-on-mach4-using-the-ethernet-smooth-stepper-and-c82

Check this out:...

It is hard to give advice as there are so many routes depending on your budget and objectives. If this is a hobby machine, get it working as it is as quickly as possible with what you have. If this...

These motors may be an overkill:
https://cnc4pc.com/nema34110ac-closed-loop-stepper-motor-driver-hybrid-servo-kit-1699-oz-in-shaft-size-1-2.html
But they are so powerful, easy to setup, and...

Checkout this one: https://cnc4pc.com/forum/projects/tool-change-macro-for-uccnc
You can find all the configuration files in the post.

It is a straightforward retrofit. We can help you with it. ...

Here is a sample macro:
https://cnc4pc.com/forum/projects/tool-change-macro-for-uccnc
It is a carousel type, but you can change the script.

Arturo Duncan
https://cnc4pc.com

That fault signal is common with the mains of the motor. You cannot hook it up directly to inputs on the masso as it will create a ground loop. Please check these boards that will help you wire...

Maybe this one will work for you:
https://cnc4pc.com/dg4s-16035-dc-servo-drive.html

Arturo Duncan
https://cnc4pc.com

We have lots of connector boards for servos:
https://cnc4pc.com/motion-control/special-function-boards/rj45-connector-boards.html

Feel free to open a ticket on our website and we will help you...

I would think that the dual probe should work, but I really have never tried it. I checked the manual, but did not find anything that would shed light on the issue. I know that on other programs...

UCCNC or Mach4 are good options for your UC100. Mach3 has been unsupported for about 8 years now.

Arturo Duncan
https://cnc4pc.com

The probe is just a switch.
Maybe this info is useful: https://cnc4pc.com/blog/post/wiring-mechanical-limit-switches-on-a-c76

Arturo Duncan
https://cnc4pc.com

You could get this working with these servos:
https://cnc4pc.com/dg4s-16035-dc-servo-drive.html
But considering the cost of AC servos or closed loop steppers and the high maintenance cost of the...

Nice looking? What control software are you using?

The higher the resolution the smoother the motion is, but you tend to lose torque. So you need to play with them while the motors are working under load until you get the optimal performance. Maybe...

Maybe these recomendations may help:
https://cnc4pc.com/faq/article/how-to-tune-stepper-motors

This unit cannot process the input signals in real-time, so input signals may not be that useful anyway.

If you are on a tight budget, you can retrofit this keeping the original motors and just replace the servo drivers:
https://cnc4pc.com/dg4s-16035-dc-servo-drive.html

If you do not intend to run...

Ethernet may be a much better option. Consider the UC400ETH. It is more stable.

Arturo Duncan
httpss:/cnc4pc.com

I think you are a good candidate for the C25XP from CNC4PC: https://cnc4pc.com/c25xp-smooth-stepper-integrated-board.html
There are tons of options for integrating it into a Plasma or Oxy/Cutting...

You need to configure UCCNC to control the spindle using PWM and use two outputs to control the FOR and REV signals. The info you are looking for is in the manual of the G540.

Arturo Duncan...

From what you are saying, I see that you have the jumpers set to operate the spindle on international mode. Check the jumpers and move them to US Mode. Note that on international mode relay1 is...

Here is how this works:
1. Your VFD is expecting FOR and REV signals, so make sure the jumpers on the C76 are set to US Mode.
2. Verify that when you call M3 Relay1 activates and when you call M4...

Maybe these instructions may help: https://cnc4pc.com/blog/post/uccnc-configuration-for-laser-module-on-c76

We have a connector board for those servos:
https://cnc4pc.com/c34svdb100-invt-sv-db100.html

Use Mach4 or UCCNC.

Arturo Duncan
https://cnc4pc.com