Search:

hey!!
i hawe a litlle problem..i was surching on you tube for some videos but i cant find anything useful too show howe too set up dip svitches on the driver for each steper motor! i was able too...

hey..
post under yours!!!
i tryed ewerything what did you askd me to try. nothing helped... and i posted you back!

i think that must be something in the wiriing to drivers. becouse i realy tried...

actualy ewerything what came on my mine...

i tried to calibrate all three axis for several times and its ok..
today i changed the port cable-no change
i instal mach2 to se if the program is...

hey!
well i changed te port cable....same thing :(
i hawe a question shoud be the drivers grounded? becouse i forgot to tell that my motors are giving strange sound but not big noise yust strange...

ok sory but half pulse sherline mede is...?? :) hehe...

BUT I FOUND SOMETHING!!!

parallel port CABLE is doing something strange... when i hawe powerd on the machine sometimes is grounded...

so first the driver then the power suply...
but is not out there litlle more cheaper and also good driver than gecko for 230e?? :) can you recommend some drivers? (if there are some good and litlle...

hey

ok so i will get another power suply and try it... but shoud i buy stronger one and use it like single or buy the same like one i hawe already and wiriing them together?
yes i hawe one motor...

so that might be the problem for losing steps?
i am thinking to buy full new kit but i am limited to about 200e...so what shoud i buy?
or if i buy only one more power suply and the drivers..? i...

here are the specs of the motor
271126

my machine is ALU constrution working area about 800x800x250 mm (X Y Z)

velocity i am using is 1000mm per min
aceleration 45mm per second
but i use...

it runs fine by hand, and by MDI in mach3...only if i run g-code than it goes all crazy!! there is somethitg that i dont know if its good...
i first bought cnc kit NEMA17 for tryout yust for me too...

HI!
i was/am building my home cnc and i am yust going to freak out becouse my "machine" is losing steps when its doing the g-code file and i hawe tried many things to do it beter...nothing helps......

hey i am new her and i build a cnc and now i hawe some litlle problems whit what pulse/rev and micro to set for my motors...i hope that i didn broken them:/
i use nema23 3A steper motor...
can...