Have a VTC 16B with M-Plus control. After tool change machine axis starts moving before magazine retracted. If X zero is near ATC head hits the ATC. Have tried changing R2174 & R2175 from 0, but it...
Type: Posts; User: tony y
Have a VTC 16B with M-Plus control. After tool change machine axis starts moving before magazine retracted. If X zero is near ATC head hits the ATC. Have tried changing R2174 & R2175 from 0, but it...
Have a Romi lathe with Fanuc OT. Spindle speed readout on CRT shows intermittent spike but actual speed doesn't change. Causes feed to lurch and gets ugly. Have had spindle drive and encoder...
Parameter #28 is 00110101 this matches the number in the original machine parameter book.
Have Romi Centaur 35E with Fanuc OTC. problem is with spindle running speed readout on CRT will jump up which causes the feed to lurch to try to catch up. Physically the spindle speed does not change...
Have Romi Centaur 35E with Fanuc OTC. problem is with spindle running speed readout on CRT will jump up which causes the feed to lurch to try to catch up. Physically the spindle speed does not change...
have romi lathe with fanuc otc. found g92 to limit max speed but how is it cancelled and can it be set differently for other tools or operations with same tool?
have 2 issues may be related, don't know. both happen intermittently. 1st is feed will lurch, when this happens it appears on the screens you can see rpm reading flash up high but spindle doesn't...
I have a Romi 35E and the parts counter doesn't work. Would like to find a list of parameter bit definitions. Machine sat for 6 yrs and had to have tech reload parameters and get machine running....
Looking for input on cad/cam using Mazak m-plus and m-32. Would also like to use on romi/ fanuc lathe. Been looking at Gibbs, Mazacam & camlink
have centaur 35 (old) how do i setup to use the footswitch for the chuck
Thanks
Yes the spindle locks when spindle orient is performed manually.
If there was a slippage problem wouldn't there also be a problem with cutter stall under load? not having this condition. As the spindle is coming to stop on the control it appears the brake is...
I have a mazak vtc 16b. when the spindle is suppose to stop it coasts to a stop and does not lock. the spindle does lock after a tool change.the brake makes noises when the spindle starts and stops....
resurecting a romi centur 35. had to replace Z home switch. How do I save nem setting? lost it when turned of control. is there a page to set tool goemetry such as round or square insert
Thanks ...
need post for mastercam 9 for mazak mplus
Thanks
Have mastercam 9 want to use on mazatrol m plus. Can anyone help me with post and setup? Thanks
Is it possible to program 3D using just the m plus control ? Can"t find anything in the manuals.