Search:

The topic can be deleted. The problem is solved.

Hi!
Does anyone have a postprocessor Agiecut Classic 2S for Fikus VisualCAM?

Hi!
Does anyone have a post processor Agiecut Classic 2S for Fikus VisualCAM?

Hi!
According to the manual, I describe the parameters of the workpiece, create machining, and choose the technology. In the graphic test, everything is displayed well. When I start processing, I...

I also solved the problem with "abnormal temperature of the electronics". I desoldered 2 relays (KT1,KT2) on the E416/2 board (on SBX-10 board) and soldered 2 jumpers. Now the machine works normally.

I will answer my own question about threading the wire. The reason was one of the relays on the ADC-16 board. I changed all 4 at once so that in the future there would be no problems with any of...

An attempt to automatically threading the wire.

Hi, everybody.
One morning I came to work, and my machine can't automatically and manually threading the wire. I disassembled the upper and lower heads and cleaned everything, but the problem did...

I apologize for the late reply. The reply notification does not work.
In my case it was a software problem. I performed the memory reset procedure, reinitializing memory and all the errors...

I answer my own question.
To change the interface language to English, you need to go to the Machine parameters menu from the main menu (photo 1), go to item 6 (photo 2), enter the password (photo...

Does anyone know how to change the language on this machine from German to English ?

Problem is solved.

Anybody knows anything about this problem? All LEDs are lit or blink green on all units. No red LED

Hi!
I have such problem. In the morning, I turned on the machine, run all axes to the machine zeros and received the error 2 EMERGENCY STOP. I turned off the machine with the rear switch and turned...

Hi!
I have the exact same alarms on my Mazak VTC-30C with Mazatrol M-Plus. Did you solve this problem?
My 24V power supply failed. I repaired it, but the following errors remain and cannot be...