Thanx,
I'll give it a try.
I also downloaded some stuff from a web site
thanx again
the more tools I have the better.
I've never started a job where so many people wanted me to fail.
that's...
Type: Posts; User: actionman
Thanx,
I'll give it a try.
I also downloaded some stuff from a web site
thanx again
the more tools I have the better.
I've never started a job where so many people wanted me to fail.
that's...
Hello All,
I just got a new job, and I need to threadmill a 1/8-27npt in surfcam 2004 and
on a Haas VF-4. I'm a Mastercam user and I'm unsure about the settings
in surfcam as pertaining to...
I thought it was increments of .0005
Joe
Hello,
I have a kitamura w/ 6M control and I use the same offset page for tool length
& cutter comp they are called up different in the program
Ex.
G43H1 (for tool length)
G41 or G42 D25 ( for...
Well thanx for looking
Joe
Hello All,
The batteries went dead on my tree 3100(millenium)
so I got new batts
now it says
Y lag over max
and jumps when I try to move it
I tried to put in the s11confi.cfg file but it says...
Thread has been moved to
General Electronics Discussion
The welder is up and running.
There happen to be an electrician at my back door when my dad
and I were ready to put a plug on and try it . He was there to determine
a problem w/outside lights so...
thanks Al,
I have no problem getting professional assistance.
But I like to have an Idea of whats going on, so that
someone doesn't try to sell me an $800.00 step down
transformer
thanx...
Al,
My neighbor said I need step down transformer
I guess I dont really know what you mean by use 2 phases
is there a diagram of sorts
thanx
Joe
Al,
A Big Thank You Sir,
it never ceases to amaze me, the wealth of knowledge and
generosity of sharing that knowledge on this forum.
again
thank you
Joe
Hello,
I just got a thermal arc welder
it is single phase 220, but my shop has 3 phase 220
Is there a SIMPLE way to convert
any advise would be appreciated
thanx,
Joe
Check this guys turret out
http://www.issintl-inc.com/latheturret
J-Rad you sound like a kid whos Daddy owns the shop
I think it might depend on if its an A control or B control
We had an old mori that did not do it( A ) but I believe a (B) control will and it
is M17,M18(is whats in my programming book)
Do you...
Dan,
Thank You very much, it was the brushes
bbreid,
sorry, don't know about boards
How much are they going for anyway?
Thank You Sir,
I'll check it out
the 800 is dithering about -7/8
801 is 0/1
802 is -5/6
Thanx again
Joe
anyone, anyone, Bueller, Bueller
Kitamura 1982 or so
I get intermittent 421 y servo alarm
i took the covers off and ran it no tool and ran fine
It seems right when I have a job to do
it alarms
any Ideas
It also seems that...
It also seems that when the alarm happens, and I reset
if I don't touch the ballscrew it will alarm again.
If I turn the screw by hand (even an 1/8 turn ) it will go ,as in home Y
There is also no...
Kitamura 1982 or so
I get intermittent 421 y servo alarm
i took the covers off and ran it no tool and ran fine
It seems right when I have a job to do
it alarms
any Ideas
Thanx
Joe
Try G50X---Z--- at beginning of each tool
and the same number at end of each tool but change G50 to G00 at end
the X--- Z--- represents the tool touch point on face of part for Z(usually...
Hello,
I have a Hardinge HXL I am thinking about retrofitting
but all the threads (from NCCAMS) I've read got me to rethink
As i figured it was fairly simple because Im just replacing an old ...
big mak has drilled the correct
thank you
rpx1 for taking the time to answer questions
this is very good info for shops
for quotes sake, I too would have been around
35,000 to 40,000 (don't know about shipping cost)
Joe
Hello All,
I just bought a shop about a year ago.
Been lurking on & off this site for a while just joined though.
There is a TON of info & experience here. I love it.
And its been keeping me...
I bought a shop a year ago after being in the trade awhile
the deal was so good I couldn't pass it up(yeah right)
Just got off the phone with Anilam guys
they said just switch 2 & 3 on one end of cable
I did that and it worked
Thanx Anilam
Joe
Hello All,
I'm looking for the pinouts (db9 to db9) for my tree mill w/Anilam control
and any other info, to get this thing hooked up to the pc.
I've checked baud , etc to make sure they are the...
I tried but there is no place to put them in (no aux button)
thanx