OK managed to get it working. All tool changes working as it should. Thank you for the pointers
Now another issue. Not affecting the actual operation of the tool change but would make it faster....
Type: Posts; User: impi62
OK managed to get it working. All tool changes working as it should. Thank you for the pointers
Now another issue. Not affecting the actual operation of the tool change but would make it faster....
Please can you give some kind of actual example. I'm struggling with this for weeks now
https://www.cnczone.com/forums/attachment.php?attachmentid=505186&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid=505188&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid...
This is my M6 script now
o<chk> if[LNOT[ACTIVE[]]]
M6
M99
o<chk> endif
o<chk> if [LNOT[#<_tc_enable>]]
These are changes to script - see below in purple
Must i add _tool_par1_num to the parameter.txt file? and what is num??
o<chk> if[LNOT[ACTIVE[]]]
M6
M99
o<chk> endif
_tool_par1_num, _tool_par2_num, _tool_par3_numMust i put this parameters.txt?
I already set tool 1 to par1
Thank you for reply. I tried this. I added tool at top of script and at the point in the script "Move To" I added the line G53 G00 A#<tool>
So that seems to do something right. When i run the...
Thank you. Yes i figured that, but dont know how to modify script. Thats exactly what i need help with. Maybe if i can see a working M6 script with carousel so i can get an idea to modify for my...
Hello. Is there someone who can help me with Carousel type ATC. Ive been struggling along for weeks with this. I have fitted a carousel type ATC to my mill running Mk3/9
The corousel is driven by...
Sorted! Thanks Joe
Hi Everyone,I ordered the plans yesterday and registered on Joes Forum with the Paypal transaction number etc etc. Is there another step I'm missing in getting the plans or being able to log onto the...
Thank you for the replies and advice. I checked today and the spindle was off by just over 1 degree both ways. Spent a few hours shimming and adjusting its its now good. Cut flat with no ripples....
Hi everyone, been following this forum for around a year now and downloaded and built as JGRO machine. Once I had completed the machine I noticed there was quite a bit of sideways movement on the...
I think it would be cheaper to ship a Joe2006 kit to South Africa than to build a JGRO for the sole purpose of using it to build a 2006 but I think the experience gained from building the JGRO will...
Thanks for the tip EMCLLC. I'll double check all measurements before I make the first cut
Hi everyone,,
Ive been lurking around for some time now reading just about every post on this forum. I'm not even up and running yet and I'm already addicted.
I'm gonna jump in and get my first...