If the function G331 and G332 are available , then that should mean the technical requirement are fulfilled on your machine.
Cycle84 is a tapping cycle with compensation chuck
For G331/332 I would...
Type: Posts; User: Cncplaner
If the function G331 and G332 are available , then that should mean the technical requirement are fulfilled on your machine.
Cycle84 is a tapping cycle with compensation chuck
For G331/332 I would...
Where did you “dig out” the L833... That is actually a Deep-hole drilling cycle for older Sinumerik controllers.
810M, 820M , 880M and so on....
Hello
I want to switch from thread milling to tapping. Now I am thinking whether it’s best to program with Cycle 84 or L833?
Can anybody tell me some advantages and disadvantages of the two...
Ok thank you .. that's a shame!
Hi can anybody explain the term G_Tool() to me. I can’t find it in the Siemens manual?!
Thank you
Hello CNC - Cracks
Can you tell me the following: is there a command which allows you to jump 5 lines in the program?
I don’t mean Goto 123/123:
Simply something like goto 5 lines further?
Is...
Hello dear CNC community
Is there a possibility to create a tool list in an opened program in UltraEdit?
So that it somehow eliminates all (T-numbers) T1 und T2 and so on... and created it in a new...
Hello and a happy new year to you all.
Now to my question:
if you have selected cycle 832, do you have to deselect it somehow after?
Thank you
That’s a shame. So I guess we have to buy a program.. like the RCS commander?
I can access the machine but only the archive and not the Nc?!
Hello
I want to secure programs from a processing centre with Sinumerik 840D Sl on my computer in my office...
I want to use WinSCP as we already have this program.
However I can only reach...
Thank you hapo now I understood it!
I also have another question:
Feed factor at L83: a 1 is displayed
- I think it means that the machine always takes exactly the programmed feed?
If there...
Hi folks can someone help me understand the degression factor:
I do not understand what I've found on the internet:
DAM (degression)
For deep holes that are drilled in several steps, it is...
I don’t understand your answer?
Our measuring head is between 80 -160 mm (diameter) and have hard metal plates inside.
Yes, the plates are sharp and new.
And we do use plane cutting heads, however the warming up doesn’t work.
It’s a series production: raw parts onto the device on the device ad go, the machines run...
Hello
In our company we have the following problem:
Our aluminium alloy parts are coated and when processing the plane surface, the lacquer chips.!?
We have already tried ganging and counter...
First of all thank you.
So if I program:
N01 G0 G641 Adis=0.5
N02 G1 X10 Y10 Z0 S5000 F200 M3 M8 M7
N03 G1 X0 Y0
N04 G0 G64 Z10
So it could be that Z is not at zero, doesn’t it?
So open Cimco
At the top in the rider press “file comparison”
Then compare file with file
Then select the two files
That’s it!
Hello
The settings are set to the original values.
And the files are not write-protected either.
The takeover from left to right and vice versa works but edit individual blocks isn’t possible.
I have just found it in the manual. Really unfortunate:
The editing of a file during the file comparison is not possible on purpose!
No, that doesn’t work.
Either in the left or in the right column, I cannot change a coordinate, rotation speed or something else.
Only a “piep” noise comes up.
When I press delete or want to...
Yes, exactly. I compare two and then change one.
Hello
I have the following problem:
If I open two files in Cimco and I want to change something in one of the files, then it doesn’t let me. But why?
I would like to keep both files open.
...
Hello dear community
Does the path subsequent grinding has an effect on the Z axes?
Let’s say that’s how the program looks like:
N01 G0 G641 Adis=0.5
N02 G0 X10 Y10 Z0 S5000 F200 M3 M8 M7...
Can anybody help me out?
Hello
Can you give me some help with the machine setup- unfortunately my machine G550 is not in the setup selection.
Maybe one of you has already configured this type of machine?
I would be...
If I understand correctly then I need a Startfifo at the beginning of the subprogram and a
Stopfifo at the end. Is that correct?
Many thanks in advance
My idea was to increase the pre-delivering from 20 to 50 because I think that the pre-calculation of the polynomial blocks would be quicker as a result?!
On my machine only 20 rows are being pre-read!
Hello guys
I have a polynomial subprogram that is pretty long.
My idea was to speed up the pre-reading with the FIFO buffer.
I would need to start the FIFO at the beginning of the sub program...