We have been using BobCad v27 for a while. Our computer crashed and when we reinstalled we get this error when running the simulator.
378732
Thanks,
Wilson
Type: Posts; User: wmbeau
We have been using BobCad v27 for a while. Our computer crashed and when we reinstalled we get this error when running the simulator.
378732
Thanks,
Wilson
Thanks for the reply. I didn't use the Delta button when it crashed. Maybe I didn't notice it before.
After doing a translate BC crashed. When I reopened the Delta button was gone on translate. V27 build 1547
Yes Windows has gone crazy with up date.
Opened BobCad V25 as always and a permission popped up asking if BobCad could make a change to hard drive. Thought this was strange, anyone else?
Well done
Thank you for the reply, the surface of the model represents the cavity. To get the core we offset the Allowance to a negative.
We are trying to cut a core for an injection molded part. The Modeled surface is the cavity. (BobCAD would not offset properly for the core)
When we cut the core we made the XYZ allowance -.085...
Thank you Sean it worked!
Sean, We just started using our second seat of BobCad and ran into the same issue. I'm sure our 45 day tech support is over, will you help us out? Thanks Wilson
I'm still on the 45 day tech support
I'm still on the 45 day tech support
I had to call tech support, They logged onto my computer and changed/ renamed files.
It's working! Changes arc Fit to .002 and line 221 to N
We are cutting now, will update at the end of the day.
Again, my thanks
Any of you live close to Monteagle Tn.? We have an annual...
This is the post processor we use
First time to use this let me know if it works...
https://www.asuswebstorage.com/navigate/s/D0F43DB494064C2FB31FF5AF62FD0C474
If it asks for a pass: NBUSAPS
Thank you for the reply, I'm having trouble uploading zip files bare with me
This has been a tough learning experience for us, just as we think we're making progress booom here we go again... The cutter is going along a straight line cut and just turns right into our part. We...
Thank you Sean for correcting the problem. The problem was corrected by changing files around and renaming file, so was the Collision with stock error I encountered earlier. What I'm wondering...
Here we go again...
A long story condensed, Orienting a part to be drilled. The attached clip shows how my part would be sitting in the mill. The holes show to be going where they should, however...
Moving right along... Fixed the air cuts of the B plate with TOP OF PART set at 000. now how to eliminate the tool wrapping around the end???
I found it
How do you define the Milling stock for the second part (second machine setup)?
Mike You answered my question, did not see the option for "machine setup 2" TY
I called BobCAD about the collision error. Jesse called back in minutes. He went through some painstaking trouble...
Did a tool path for the B plate and it worked like expected... Question how do you keep the A plate and the B plate separated in the CAM tree? Also hate to say... My "invalid collision Pair" error is...
As promised, I'm glad to write the problem has been resolved. Tammy from sales called just to check in and was surprised to find we were having unresolved issues. It was a few minutes latter Tech...
As a work around with only the A plate visible I did a copy, open new drawing, paste. Hope there is a better way
I want to thank everyone involved who help me get going with a collision error message.
Back on topic... I'm trying to build a plastic injection mold. I have all the layers turned off except for the...
Okay it's working Build 678 64 bit machine. I put my post back in the file system, however I did not go through the process... outlined in getting started... of adding the machines in the CAM Part, ...
This morning I did a clean install (removed BobCAD directory) Installed Build 678 from CD without adding my machines and it worked. Upgraded to Build 769 from download link, did not add my machines...