Hi i was wondering it seems that bitmap smoothing and relief smoothing are the same thing . is this correct or am i doing something wrong ? im trying to draw signs very simple and im doing flat...
Type: Posts; User: dgalaxy
Hi i was wondering it seems that bitmap smoothing and relief smoothing are the same thing . is this correct or am i doing something wrong ? im trying to draw signs very simple and im doing flat...
yes im really considering that. alot of guys on the other board are recommending to call drives warehouse im going to give them a call today
Hmm i geuss no one has tried this maybe ill give it whirl and see what happens
John
Hi i was wondering can you use a vfd phase converter to power the the tree 325 delta 10 machine " instead of a rpc" or will that screw up the vfd inside the machine? . right now im just looking...
ok everybody i got this machine ordered katy said they have dropped it off for shipment i cant wait to get this machine and check it out
John
i am in the stage of purchasing a machine from omni my sales person is katy ill let you guys know how it goes
John
Hi ive been dealing with Katy over at omni so far seems to be going ok i can wait to get it ill let you guys know how it goes im getting a 1325
John
Thanks jzarski
Ok looks like im going to get the omni 1325 i hope this goes well
John
I have gotten a quote from katy zhang over at Omni seems like a really good price and a good bang for the buck i still haven't heard back from taney from quick cnc
im definitely going to go...
Hi i haven't posted on here in a long time but im going to buy a new router in the next 2 months ive been looking at the 1325b and the 1325bg sold by various vendors i really would like a cam...
Just to let you guys know i got the drive to read this morning i was running an older version of the tuning software i updated it and wala it started working i have to go to work ill mess with it...
I hooked up the drive totally I also got mach3 to move the motor but the tuning is way off..... I have the programming stick installed the usb connected at both end power hooked up and the...
Hi I just started getting these drives going I have nothing connected but the programming stick and the usb cable . The software shows a drive with a different serial number
and it says DRIVE NOT...
it would just be in steel and aluminum i was just wondering i didnt want to buy a 3 ton and then it be useless for me. i just want to broach some pulleys and a couple of sprockets . so for small...
Hi im looking to buy an arbor press what size should i get im looking to broach some pulleys with up to maybe 1/8 inch slot do you guys think i could get by with a 3ton press i have no idea wich...
No more replies to this thread did any one ever buy one are they happy with this machine. I am also thinking baout buying one.
John
Ok i got my vxb angular bearings, is the bottom line on the whole deal to keep the inner races seperated just a skosh so you have room to tighten and bring them together and make the inner races...
Hi i just purchased a g320x driver for my nema 42 bridgeport today. i have been useing other drivers but i wanted to try the gecko because i have them on my plasma table and it seems there bullet...
Hi i was wondering what would be the maximum cable length from the drive to the motors with out having any issues. i have 4 g201 and 280 oz nema 23 at 45 volts
John
Hi i have a table with 4 g201 .I have the 260 oz rexstep motors i dont think they even offer those any more. My question is everyone says to set the pulse to 2 but my motors just chug at 2 if i...
ALIBRE IS AWSOME like they say best value in 3d .................................
could you give me a model of a good ati card that is as good as the 8600gt if not better for around the same price i want to try out one of those radeon cards
John
it is definitly the nvidia card i did all the settings per bobcad but still does it
crashes about every30 seconds when i take the card out bobcad doesnt crash. all of my other programs work fine...
Hi what are the best files to import into bobcad from alibre to keep it stable
it seems everytime i try to import a stl file it crashes after about 1 min" and the stl are white blank looking but i...
thanks so much for the replies i think when i buy my third motor im going to go with sem dc brushed instead of glentek
John
Hi i have 2 glentek 26inch pound servo motors with 200v rutex drives on a bridgeport series 1 . My motors call for around 120vdc i was wondering if i run them at 67 volts for now will i have alot of...
I built this from cris brunos plans i have come to the conclusion i can either remake it out of 1/2 plate instead of 1/4 but then i will have to make the coupling longer because am running 2 to 1...
I have built a home brew z axis for my bridgeport when i test the for backlash on the actual quill bracket which bolts to the ball nut there is zero back lash but when test on the end mill or...
machintek so you thinnk i should be able to get better results
I was wondering if my screw has a lead accuracy is .002 per ft. With .0015 backlash is that acceptable or is that still to much on...