Hello Jim,
It's been awhile since you helped me last, which I appreciated, would you happen to know how to solve a ID threading problem on a T2 controller?...
Type: Posts; User: ic-cnc
Hello Jim,
It's been awhile since you helped me last, which I appreciated, would you happen to know how to solve a ID threading problem on a T2 controller?...
Hello guys,
Anyone know which parameter to edit for approach and retract clearance before and after an ID thread for T2 Mazatrol? The attached video depicts the problem with the stock moved back...
During the summer I have been cleaning out various storage and tool boxes and came across a few unknown items. What are the following items?
#1293598
#2293600
#3293602
#4293604
Sounds like a good find. I have the same machine and wonder about it's lube and way oil consumption.
Hello Iperel,
Are you using a v-shaped grooving insert? Or a .005" wide grooving tool?
Are you programming a type 0 or type 1 groove?
Hello xa-mont. Which turret (4, 6, 8,12 tools)? Tailstock included?
Hello Felix. I did get the MV35 working. I do not have manuals or documentation at the moment but I will tell you what I've committed to memory. Remember, by no means do I claim to be a certified...
As it turns out, the lower proximity switch for the arm down position was faulty (stuck in the on position). Once it was replaced, it successfully changed tools manually actuating each spool valve,...
I believe you need to look at parameter numbers 4000 to 4020 to see which tool number are loaded in the spindle and pots.
select MDI mode
press "param" button
key in "N4000" and input
...
hello all,
were you able to fix the tool change problem?
I have similar problems with a MV-35 w/Fanuc 6m. I was able to realign the tool arm and manually cycle it (depressing the spool valves...
I have one for a MV40. What do you need?
If you have Fanuc 6M, I may be able to send you info.
infinityprecmac, I have the same problem. The automatic tool change LED is on, Z axis is inoperable using MPG mode or Home mode. There is an error code 250 (I don't know what to look for), but the...
Oh, is a Fanuc 6M Model B.
Hello All,
I am a newbie, in every sense. I am fresh out of college and am the sole operator of a Mori Seiki MV35. The toolpot is in the down position and will not return to the up position...
can someone send me the fix too?
jimmy, hey thanks! your post was very informative.
i was able to get a couple of tools' offsets set by comparing programmed diameter with the actual diameter produced. x offsets were off a bit. ...
Hello all. I'm Jimmy, newbie in every sense...but fascinated CNC since seeing it online. I have recently gained access to a Mazak QT10N T2 that has been sitting. My buddies are conventional...