Search:

2nd LS switch?

I program/setup an HX250 and a MY3XiF. On the bottom right edge of the control, next to cycle start should be another red button that says "STOP", to the right of that button is "CW". Stop button...

If its just in your render, than your flash settings are back to default. I usually set my cut part chord height to .0001. Larger values will make radius appear truncated

The battery is located on the Viggo Servo Absolute Pulse Coder. Similer to fanuc daisy chain style battery. Had same issue on my HX250. Received new battery from Kitamura Chicago, up and running in a...

G92 A0; reset A axis
G1 A-5; retract filament from extruder <----------this line is why g28 on the next block is slow.
G28
M30
Yet when I have tried it, the results are what I...

Are you locking the index table or are you milling it live? maybe the worm gear is worn and what you are seeing is the slop in the gear

LC service is the absolute best. He's pretty much a one man operation so sometimes its hard to get him in same day

I have 3 excel PMC5 machines. what pieces of crap they are. when we moved the three from our old building to new one, we had so many atc problems. one machine performed tool changes upon re-install,...

try separating your m-codes with either a dwell for no time, or simply g90 or g0. do something to prevent stacking more than 3 consecutive m code blocks.

I had the same issue once on a Kitamura...

I had the opposite problem with my A51, but mine was due to an idiot slamming it. mine would never take the shortest rout, always moved in the clockwise direction. had service out to replace the...

I've always had to zero return the machine after a g20/g21 change. as far as I can tell, the controls I've worked on, fanuc 0m, 21, 16, 18, pretty much just move the decimal over one place to the...