Search:

Good morning,

I need the parameters, timer's, counters etc for Moriseik MV40 with Fanuc 10M A the 1988, because there was a ram error and I lost everything.
I would greatly appreciate anyone who...

Good morning,

I need the manual in english of the manual machine mikron 750/1000 tnc 426 year 1995. I only have it in german and incomplete.
If anyone has a PDF if possible send me to...

Hello,

I have a center Mikron WF 72 D with heidenhain, It lost parameters, if someone have a backup can help me. My email is [email protected].

Best regards

Vide

Good morning,

I had a problem in Meldas 64M (battery fault), I initialize de memory, put again parameters and programs , everything works except G53 to G60 (alarm P39). Someone can help me.
...

I have recently bought a cnc Machine center Kondia B500 and doesn't have break in Z...Is normal or some one take out the break, in electric drawings i have the relé, but in the board It have only the...

Hello

Can any one help me with a 1997 Harrison GE Fanuc Alpha 400 lathe.
It have the alarm ..servo alarm 414, with dip-switch I go to diagnostic and in nº201 it have 00010000 (1 is EXP). I...

My email is [email protected]

Thanks

Castro

How about T01 INSERT M06 INSERT EOB INSERT..
The insert doesn't work in MDI, I think the problem is in parameters.

Castro

In MDI mode I can't put in same line T1M06, but in edit mode i cn put in the same line.

Thanks
Castro

hello,

I have a Fanuc OM Model C.
The program 9000 is active to tool change, if i made a program like
T1 M06;
M30;
In aut works well.
But in MDI mode i put T1»»input»»M06»»input»»start it...

Good morning,

Now it's work very well. It was necessary change the parametre P004 to.

Thanks
Davide Castro

Good morning,

I have a lathe with command fanuc om and it's config to work with axis X in radius. That parameters it are necessary to modify to work in diameter, as much I program and offset.
...

Hello,
I'm looking a parameter or G code (fanuc OM c )to do that: if the program a have 3 points that made a line and if I start the program the machine almost stop in the points and i dont wont...