:) Never mind, I got in touch with Mike Moles.... and voila, I have my spindle problem solved ;-) :bowdown:
Type: Posts; User: oliverhanisch
:) Never mind, I got in touch with Mike Moles.... and voila, I have my spindle problem solved ;-) :bowdown:
:willy_nilly:
:drowning:
Hi all,
I am in the process of sorting my options to either rebuild my current spindle which could be in the neighborhood of $15,000-20,000 or finding a used one...
Dear Members,
I am looking for a machine repair specialist that can repair the cross feed on a large Poreba lathe that is located in Austin TX.
The lathe is cutting in an angle across the x-axis....
Rigid tapping question solved.
G84 built in canned cycle is providing all necessary synchronization as I could have learned from the manual..... sorry for having been lazy and try to shortcut here...
Hi Bill,
no M06 required at all. That's what you mean right?
All I have to do is put in the tool number with T... and it changes it.
The only thing it doesn't do is closing the tool changer...
Dear members,
after I now successfully re implemented my tool change macro on a VTC-41 year 1991 with a Yasnac MX3 control, my boss wants me to find a rigid tapping macro and implement that.
I...
Problem solved.
Bill and Todd,
everything was implemented correctly but the version was wrong.
I needed Tool Change Marcro 430-1A.
I had 430-3
Lesson learned, don't assume that an...
Hi Bill,
thanks for picking up this thread again.
the identification of the particular items I extracted from the manual I have, but I am glad if it's not accurate, because it might bring me...
This is what I replied to Todd on the the practical machinist forum:
I put the macro in just like you suggested to do it. I remembered that I had already done it before, so I actual just checked...
Finally done !!!
my H400N is working now. The parameters that I bought from Mazak for 325 dollars were missing R2185 and R2186 values and without them, the ladder calculation for the spindle heat...
Dear Bill,
I hope that you still get alerted when a new post gets into this threat.
I finally got to put the macro into my VTC41.
I put it in as O9000 and let it called up with a T command...
Well....... if I could spike anybodies interest here again..... unfortunately it was not the I/O board.
I put the board in and received a bunch of random erroneous errors. It looked more like...
no codes on the FR-SF....
Dear community,
Upon repositioning and adjusting of the 6 pallet changer and after everything was ready to go, I all in a sudden received a 370 spindle over heat error.
The spindle wasn't even...
Oh hi Bill, I didn't see that you also replied on CNC zone.
I am still tied up, but will let you know asap what my results are when trying putting the macro in.
Sincerely
Oliver Hanisch
Hi Lugomez,
did you get any alarm message on the screen?
I have a 1991 VTC41 and went through quite a bit of problems with it and might be able to walk you through a couple of things.
Let...
Wow, not a single answer....
Dear members,
First off, I apologize for this long post.
If someone sees the challenge in this, they will read this all the way and try to make sense of it.
I am either seeking help in making...