Hi Tom,
I ran some tests with the motor supplies off using a MaxFollowError of 1e+009.
I can now confirm that the issue occurs with no axis movement or supply voltage input.
Firstly I...
Type: Posts; User: dPiccolo
Hi Tom,
I ran some tests with the motor supplies off using a MaxFollowError of 1e+009.
I can now confirm that the issue occurs with no axis movement or supply voltage input.
Firstly I...
Hi Tom,
I appreciate all of the detail you provided, it absolutely helps clarify what's happening behind the curtain.
Today I configured our axis as channels 0,1,2,3, and I added channels 4-7...
Hi Tom,
I ran several tests using your Max Time Slice program.
Initially I simply jogged all the axis opposite to home on the table and then ran my home script. Before running home.c the Max...
Thanks Tom, I will post the test results tomorrow.
In the mean time here is the CustomDef.h file: https://www.dropbox.com/s/5knz2d8ipj5f4ch/CustomDef.h?dl=0
Here this should work:
Step Response: https://www.dropbox.com/s/7sng8gg9r884bcw/X1%20%281%29.txt?dl=0
Init.c: https://www.dropbox.com/s/gbaaf479lxvupgv/init.c?dl=0
springlakecnc,
There is no mechanical problem, the machine works perfectly fine between episodes and as I stated the problem occurs at different positions moving in different directions. The...
Hi Tom,
I'm hoping you can help give us guidance to solve an intermittent issue we are experiencing with our machine. The problem started about a week ago, we operated the machine for about 2-3...
Hi Tom,
I'm pleased to say that after installing 4.33j our problem is resolved! Thank you very much!
Saving the creation of a new thread I've found a potential issue with 4.33j, my cprograms...
Ok so I ran several tests using a blank M6 file (containing only a printf)
Each time kmotioncnc gave an error stating an axis was disabled however no axis was disabled (they remain green) and the...
Hi Tom,
Thanks for responding so soon. The message in the console indicates that it has disabled due exceeding Max Follow Error. This is not typical of our Y axis, only in this scenario do we...
Sorry Tom for my inaccuracy, that second snippet of code wasn't actually used I was trying to give you an idea what we tried and I made an error retyping it. There were no syntax errors in the c...
Hi Tom,
I am another member of the team that posted a bug question here:
Problem Bug found on SnampAmp
We are now having issues executing an M6 command while running gcode.
First let...