Hi, no need to give up and use a old-style sdcard emulation.
It's possible to get modern USB & network emulation. Combined with permanent
internal memory, you'll be able to save/load and then...
Type: Posts; User: blackvision
Hi, no need to give up and use a old-style sdcard emulation.
It's possible to get modern USB & network emulation. Combined with permanent
internal memory, you'll be able to save/load and then...
Hi, Mitsubishi USA has officially developed a certified USB/Network emulator for all Mitsubishi/Mazak/Meldas machinery.
You can easily get from it MCMachinery Chicago if you're in USA, or from...
http://embeddedsw.net/images/EMUFDD_USB_front.jpg
http://embeddedsw.net/images/EMUFDD_ETH_front.jpg
USB & Network floppy retrofit/upgrade.
Worldwide selling and assistance directly from the...
http://embeddedsw.net/images/EMUFDD_USB_front.jpg
http://embeddedsw.net/images/EMUFDD_ETH_front.jpg
USB & Network floppy retrofit/upgrade.
Worldwide selling and assistance directly from the...
It's easy to check that the
other existing emulators:
- datex
- sdcard
- hxc
- chinese gotek & richpeace
don't have the capability to support the TCP/IP standard network.
All infos are provided writing an email
to the EMUFDD customer support.
Moreover the emulator is a fully
custom & integrated product,
not a mass hardware sold "as it is".
Pricing comes only...
Hi, I'm trying to solve a problem on a BIESSE
with CNI rt480 control. The internal ram is only
1MB and I need to load a cutting program that
is 1.5MB of size.
The program can't fit into the...
http://embeddedsw.net/images/EMUFDD_USB_front.jpg
http://embeddedsw.net/images/EMUFDD_ETH_front.jpg
USB & Network floppy retrofit/upgrade.
Worldwide selling and assistance directly from the...
I've also created a video about the
special operation of digitalizing the
Arburg floppies using the HW emulator.
ARBURG 270 - Multronica - EMUFDD - Digitalization and Backup of Floppy Disk -...
I've created a video manual about installing
the Simplified VFD software. Hope it will help.
Simplified Virtual Floppy Drive (VFD) - Install - YouTube
The EMUFDD emulator is a hardware floppy disk emulator.
It works like a bridge.
One side is connected to the CNC / machinery, using the
floppy disk flat cable: 34pin, 26pin, ...
it depends on...
It's now possible to backup and digitalize all the
not-standard floppy disks used on the ARBURG plastic
injection CNC.
This kind of floppy disks was pretty unreadable,
even at the lowest level...
EMUFDD with USB & ETHERNET
Floppy-to-USB/ETHERNET retrofit and upgrade is now available for any existing industrial machinery:
ABB, ACIERA, ACORN, ADVANTEST, AGATHON, AGIE, ALBERTI,...
The EMUFDD4 tech-page is here:
EMUFDD 4.0 - USB Floppy Disk Replacement / Hardware Emulator
(You can write directly to Eng. Cosimo's email)
The best thing about EMUFDD4 is that it's not a mass...
There's another software: RTCAM that should fit.
I suggest you to ask [email protected] that
is providing assistance on BIESSE ROVER machinery.
Here some essential info about
accessing the BIESSE ROVER floppy disks:
"CNI RT 480" controls use plain 1.44Mb floppy disks.
"CNI SY3" controls use 720Kb floppy disks, overformatted at 800Kb....
Universal support for custom rotation speed and
custtom data density (FM, MFM, 125KHz - 500KHz)
has been added.
Product manual can be found here.
300rpm / 360rpm support for 1.2Mb floppies has been added. :wave:
Tested succesfully on strange TAJIMA / ZSK / BARUDAN.
http://embeddedsw.net/images/EMUFDD_flow.jpg
EMUFDD 4.0 - USB Floppy Disk Replacement / Hardware Emulator
* comes to you with all supported floppy interfaces within an unique firmware,...
http://embeddedsw.net/images/EMUFDD_front.jpg
http://embeddedsw.net/images/EMUFDD_flow.jpg
EMUFDD 3.0 - USB Floppy Disk Replacement / Hardware Emulator
Why should I replace my floppy?
*...
Users that need to get rid of the physical floppy drive
will enjoy this freeware opensource software.
On any pc you'll be able to work/read/save using a virtual drive,
flushed from and to a .img...