I know this is an old thread but, were you able to make it work? I want to do the same thing but, with a 2012 VF-2 and Servo Control
Type: Posts; User: sm2000
I know this is an old thread but, were you able to make it work? I want to do the same thing but, with a 2012 VF-2 and Servo Control
I have had the same problem and found out the machine wants to see.
Let me know if this solves your problem
from this format
T5 M6
G0 G90 G54 X-.625 Y5.72
G43 H5 Z1.
M8
YCI was pretty good about sending it to me and i posted it below - thanks
%
:9020(20M6TOOLCHANGE)
#3003=1
IF[#1015EQ1]GOTO300
IF[#20EQ#0]GOTO100(WITHOUTTALARM)
M70T#20(TFCHECK)
G4X0.1 ...
-I tried and entered the the information but it did not work
-I found a macro for the tool changer in my fanuc manual but it does not work either? I ended up with a 114 alarm
This is what i...
thank you very much - I will give it a try today:)
Hello all, I hope someone can help me with this problem?
First - I had an 101 PS alarm and was able to clear this alarm
101 PS = while writing to part program the power was turned off (didn't...