Search:

Hey tim, John here

Mach3 can make a great 3D printer controller, trust me :)

As for what limits the speed of the prints, it's mainly mass of the moving parts. If you're going to build a...

Here's a few

http://forum.seemecnc.com/download/file.php?id=719&t=1

And here's the same part, but printed with Taulman Nylon 618 that we sell
...

Well, get rid of the threaded rods and go Delta! The delta platform has a lot of advantages for a printer, speed, accuracy, all axes tuned equally, larger build volume etc... We (open source) do...

Sorry I missed this thread TWP, John from SeeMeCNC here. I could have printed that part for you at ANYTHING from .002" resolution up to around .020" resolution, but since my machine's aren't "real"...

Hello everyone on the zone, John here from SeeMeCNC.com Some of you may have heard of us from our 3D printers. I'd like to introduce another one of our CNC machines we're building and selling, and...

Hey Guys, John here from SeeMe

Wow, these threads are taking off fast aren't they? It's amazing to think that what was just an idea and a "hey, what if we" in November has become so big so fast. ...

Jeremy, John here from SeeMeCNC

Yes, the instructions are lacking in info a bit. We have wanted to keep this as open-source and community driven as possible. There are wiki pages on reprap.org...

Well, thought I'd stop in and say Hi! This is John here from SeeMeCNC. Hoss, thanks for picking up a kit, we had a blast stumbling onto this thread today and seeing you unpack our kit. Too Cool! ...

SPEEDRE

The extruder kit comes with the two heating resistors and the thermistor used to heat and monitor the heats. You can add a stepper motor for $25 more to it, so you get that too. The only...

Hey SPEEDRE, John here. We sell just the hot-ends from our machines, if you're interested. Also, we sell the nozzles and resistors/thermistors seperately too. Our nozzles come in .020" dia. hole...

Thanks for stopping by our facebook page. We've been working on this project for a few months, and are ready to start selling kits. We were trying another route to crowdsource first, but, didn't...

Ok, per Daves suggestions, good by the way, if you hover over the images, you'll get the popup descriptions of what the images are. I'm working on a wordpress site possibly, and the nextgen...

You bet it does Dave. Keep the feedback coming

I can totally understand what you mean. I don't like buying anything over about $100 online unless it's got a good rep, or have heard of people with...

Phoneman, yes, I'm up right now working on our site. We just finished our Indigogo site project, and you can check it out and buy one on there, or contribute to the different levels we have up. ...

Fixed, Thanks

Just to let you guys on here know, we're building our new H-1 3D printer kits NOW!. Basically, they're a famous open source Huxley based 3D printer, but instead of printed parts, we're injection...

Can I ask why hardwood? It looks like a washer/bushing of a sort, so wood is ? on wear etc.... unless you use something like teak, cumaru or ipe. What exact "hardwood" were you wanting to use?...

Wish i could help, I'll be watching this as well to see how its done? I know you need to use the g54 offsets for EIA style programming, so ?

If these are going to be for a fixture, do you really want to use poplar? It is not very stable, especially with humidity changes etc... Would you want these parts sprayed with a clear finish at...

I would bet that you have the wrong post for your machine/control. I've seen a few machines that the first lines of code contained a G91 G28 Z0 to take the spindle straight up to Z home position,...

Also, in the toolpath operations did you check to see if "stock to leave" has a .5 in it? Just a thought, but above is prob. right, it's in your comp method I'd bet.

yes, you have to assign a new plane. It's really not too hard.

Can you post the file or? I have a couple ideas, I can't think of how to explain it, but there is a mold ability in there somewhere?

+1 on the SCM, they make alot of good woodworking equipment. I have been programming and running a Fulltech imported through Multiax for 5 years now, and for the money? It'd be a tough sell to step...

hard to think here, but i think in the toolpath screen, there was a planes tab, and in the work offset, change from 0 to 1, on each operation you have to do that if i remember right?

I have to agree that I have had excellent service, by far WAY BETTER than anything i've ever had with my masterCAM dealer. I have tried converting more people to it. There are problems with every...

The X series of mastercam has control definitions and machine definitions that you can adjust to alter the way you post code. I would bet it has something to do with a control definition. I see...

A traveling steady rest that travels just to the left of the tool, so you would rough the part down to flats, on the first pass from left to right, then hold tight to those flats and profile from...

PM sent!

Have you tried Legacy Ornamental Mill

That's what we use