Search:

Very bizarre, up to 20 parts with no fluctuations. I'm not sure what i did exactly but it appears to be resolved.

Appears to be fixed but not solved.

Loaded up another program (cheaper to throw away). The 2nd program exhibited no "shrinking" problems. pull gcode for both parts, examine for any differences (we...

4 Part Re-Run to record values, offset appears to have increased from 0.05mm to 0.08mm

RUN / POS / MACHINE POS / TOOL OFFSET / WEAR COMP / MEASURED TURN / MEASURE GROOVE / MEASURED DRILL

#1 /...

Using the tool eye to re-offset the tool will return it to the "normal size" +/- some tool eye error.

It will show the "7.00mm" on X every time. The offsets on the tool data page also stay the same, i can keep incrementing +0.05 to get "good" parts. I am working to confirm, but I believe only half of...

Ran 2 more parts this morning, still shrinking. The machine appears to have remembered its last value since the 2 parts this morning were consistent with yesterdays string of 10 parts, so #11 was...

Yeah I have already tried the homing bit. The gcode is good and even hash checked it against the original it has not been altered. I have no idea, I have reached out to the maintenance guy, but still...

Yes they are shrinking. 7.00, 6.95, 6.90, etc. 0.05 Everytime I hit run.

Just had QT200 serviced. First part of the year is shrinking 0.05mm each time. Tested over 10 parts.

EIA programming using G53.5 and no wear compensation. Was a parameter changed? Am I missing...

The 7 segment display reads 9. The battery is 1v. Already got a new one.

I have now located the most recent backups, anyone have experience with this mainte.exe for reloading the sram? The manuals do not have anything that I have been able to

Mazak 410A mill

Here is what I know please feel welcome to provide any input on how to proceed.


Worked 100% fine until today
Windows boots
Fails to load M64 (Fusion 640) on startup,...

I have a Mazak Nexus 410A running on EIA codes most of the time.

Over the last few months I have had 4 z-axis crashes, the crash always happen after a tool change the z-axis rapids down to my...

I have a QT 200. When turning as expected it will cut a perfect circle. However if i try to machine a grove in the face of a bar with the mill head it will cut an oval off center. I have checked all...

Hello,

I am trying to run a mazak QT200. Using EIA/ISO programming. I have looked though some parameters but am unable to locate what I am looking for. I would like to reference the mazatrol tool...

Thank you so much, that worked beautifully. I was getting pretty aggravated after going though the Mazak codes for a day trying to get the axis to move in milling mode.

G110 C2 gives me this

alarm 159 cross machining impossible

Cause: The specified Axis does not exist in the counterpart system.

If i go into MDI

in turning mode:
M03 S1000 - works
M303 S1000 - works

In milling mode:
F1000.0 C45.0 - works moves C axis to absolute 45 degrees

F1000.0 A45.0 - Does not work: alarm...

Hello

I recently just started working with Mazak 410A VMC and QT200. All of my programming is being done by EIA/ISO. All has been smooth until I encountered a problem with the QT200 A Axis.

I...

Purchased AT nema 34 kit with the amt102 encoders. Machine worked fine for a day. Next morning Y axis encoder dead. Replaced encoder. Worked for a day. Now X axis is showing weird symptoms. G320x...