thank you very much for your help.
drdos, I'll check the diagnostic screen.
Superman, 'll do another test program.
I let you know if my problem is solved.
Type: Posts; User: getdog
thank you very much for your help.
drdos, I'll check the diagnostic screen.
Superman, 'll do another test program.
I let you know if my problem is solved.
Thanks for the answer.
According to the manual is waiting for an auxiliary function ends.
I can not program, it will be made to the machine missing some M30 ?.
Or the M99 code wrong?
...
Good afternoon.
I have a cnc machine Monarch PMC-V750 with control fanuc 16i-M.
While working the machine is in a state of pause and a message "MEM STRT MTN" appears.
What does it mean? What...
Yes.
Let me explain a little more the problem that I have.
My machine has 401 Servo alarm.
When you turn ON the machine is presented quickly.
I want to know if this damaged the servomotor or...
O.o
I think without
DC Motors with +10 y -10 V signals..
Hi
I want to make the process of working the open-loop controller.
I have:
Fanuc 6M
Acroloc Machine
Drive: A06B-6045-H001 Board: A20B-0007-0361
I hope you can help me whit that.
Thanks.
Hi Guys
I have a sheet bending machine ACCU-BEND model 410.
Controller card was damaged and I have to replace.
But I have no backup of the parameters.
It is difficult to program PMAC cards?
...
Voy a checar si tengo documentos de la maquina y te los paso para que puedas realizar un diagnostico mas acertado.
Saludos
Hi
worked in this way:
In mode MDI run M51 code and press cycle start
after in mode AUTO press again cycle start
on screen display LSK.
Ready for send from PC.
Saludos
Reestructuro el procedimiento:
En modo MDI ejecuto el código M51.
Presiono Start
Me voy al modo AUTO y presiono Start.
Aparece en pantalla LSK y procedo a enviar desde la PC.
Lo que...
Juanelo 12
Muchas gracias por responder; fíjate que le hice como mencionas y no me resulto la maquina se queda como ejecutando el M51 y no recibe nada (no aparece el LSK) no hace nada hasta que...
Is version C.
concerning the register G127.5, is a parameter change or modified hardware?
Thanks for reply
Hi
I have a cnc MAX REBEL 1 with control Fanuc O-M.
How to activate DNC mode? The selector panel options are: Edit, auto, MDI, Handle, Teach in Handle, Teach in Jog , Jog and Zero Return.
if I...
Buenos Días
Tengo un centro de maquinado MAX REBEL 1 con control Fanuc O-M.
Como puedo activar el modo DNC? La perilla del selector no me muestra
esa opción solo estas: Edit, auto, MDI, Handle,...
Buenas
Dices que el contactor no se enclava? Ya lo activaste manualmente para ver si
hace llegar la energía a los demás dispositivos?.. Podrá sonar obvio pero revisa contactores, relevadores, la...
true, do not specify that ... is T3.
thk...
Hi
Good Day..
I have a problem, parameters OP corrupter (ilegal) of machine Mazak QT10N-ATC M/C.
I looking something that :
page99
:drowning:
I have a list of version B, I hope will serve.
Now try to connect.
No message "LSK" or "Output" on the screen.
Parameters were lost and the onscreen menus disappeared.
I can not send or receive from pc.
ImageShack®Imagen Screen Fanuc
Note: Control Fanuc OT-A
Thank you very much for your help.
As I can be sure which version I have?
They are very different?
If no problem can send them to me.
does not have that option "TAPE" in Settings
I have no owner's manual
Saludos,
Que control en especifico tienes?
The parameters of the document were not correct.
I are only those of the tape.
Do not know how to operate the tape reader
Gracias, lo intente pero no me aparece la opción de Read, la maquina esta alarmada y no me permite ingresar al menú (o menús) de la pantalla.
Cuento con los parámetros en formato cinta perforada,...
Yes, I have a document with the parameters and also a tape (perforated).
Hi
Machine: Nakamura Tome Slant SR Lathe with control Fanuc O-T
The fields (parameters) were erased by battery issues, how could login again??
thanks
Buenas Tardes
Me gustaría saber como le puedo ingresar los parámetros a un Torno CNC Nakamura Tome Slant SR con control Fanuc 0-T.
Espero me puedan ayudar.
Gracias..
Buenas... De pura casualidad aun conservan los parametros??
Saludos