Search:

You can do it in software or hardware. The software way would be to make a 20ms loop and set your duty cycle according to the position you want on that pin/servo. You can use the CCP module to output...

You need to get MPLAB and a chip programmer. Write your assembly in the MPLAB and then download your hex file to the chip. You will have to write a code to read the voltage on the ADC pin of the...

I did trip the z-axis switch, and the amount that it backs up is not enough. When you cut a sheet of ABS down to fit in the machine table, you will notice some arch to the piece. Although it would...

That would be nice....but I have yet to see anything is software that says this. It would be nice if there was a manual section on this, or the manufacture would at least answer my question.

Hello everyone! I have a Hurricane Laser, which is the same as G Weike. My unit was supposed to be shipped with an autofocus, but it wasnt. So...they sent me the autofocus in the mail. I have it...

I am mainly cutting ABS and acryllic for electronics parts. I have not had other units, but my friend has 5 universals. I cant see a difference in products. His each were $30k more than mine ;-)

I have been using my 80w hurricane for a month, and not a single problem! Im happy I bought it and I am glad I didnt do it any other way. Ian

I have the Hurricane Ivan. Everything is going great! They have gone to extremes to make me happy and earn my business. If you have any questions, I have the machine at my place and can tell you...

You seemed to have researched them quite a bit. You have also just joined, so I assume that you are only here because you have a personal mission against them....which is your prerogative.

As for...

Hey guys, thanks for the input. I am going to read and digest that.

My etching was for a detailed image. I slowed my speed to 50 and increase the laser output to 35%, and it looks MUCH better....

Well, I have had some issues with lasercut, but I am not sure what is going on. My cutting surface is 500x400mm. I am using Corel X5 to make a 500x400mm image. I export it as a bitmap. I then open it...

I received my Hurricane Laser last week without a hitch. The machine is nice. I bought the Ivan model. They told me up front that they are from G Weike.

BUT....I talked to every Chinese company...

I am not sure about their life outside of Hurricane Laser, but I can say that I ordered one and received it without trouble. My personal opinion is that my machine is built well and that they have...

Here is one more question about the layout. When I import a bitmap, it does something strange. It seems to make it whatever size it wants. It appears to take up the entire computer screen, but when I...

Thanks! Everything seems to be working great. I am running it from my eee pc, which is a netbook with windows 7 starter. Seems to work just fine.

So, is the machine actually a 500mmx400mm and not...

When I installed lasercut and first opened it, the grid showed of 50x40. What units are these? Can the units be changed? Can I change the grid size to match that of my table area?

What was wrong with the paint? The reason I ask is, if that was overlook, it makes me wonder what more complicated issues were overlooked. Is the operation easy and reliable?

Hello, I am in the USA and would like a 60w laser cutter. My top choices are MORN and EXLAS. With the same options, the Morn is more costly. However, they have a warehouse in the USA, so shipping is...