I thought that since my machine is Twin Spindle, it works like 2 machines in one, so the first 2 files would be for one machine, and the other 2 files would be for the other machine. I didn't get...
Type: Posts; User: gugu
I thought that since my machine is Twin Spindle, it works like 2 machines in one, so the first 2 files would be for one machine, and the other 2 files would be for the other machine. I didn't get...
Thank you for taking time to help.
The machine works fine, so i wouldn't want to work with the SRAM and risk loosing parameters and making the machine unusable. I just want to make an SRAM backup...
Hi,
I have 3 Nakamura Tome WT250 lathes, twin spindle, twin turret, Fanuc 18i TB control.
I made SRAM backups for the machines. For 2 of them, the backup works ok, it writes 4 files for every...
In my case, the 2 resistors R51 and R52 on the DC buss were open. The resistors are on the main board of the Spindle Amplifier (not on the communications board).
Replace the 2 resistors at it might...
In my case, the 2 resistors R51 and R52 on the DC buss were open. The resistors are on the main board of the Spindle Amplifier (not on the communications board).
Replace the 2 resistors at it might...
In my case, the 2 resistors R51 and R52 on the DC buss were open. The resistors are on the main board of the Spindle Amplifier (not on the communications board).
Replace the 2 resistors at it might...
In my case, the 2 resistors R51 and R52 on the DC buss were open. The resistors are on the main board of the Spindle Amplifier (not on the communications board).
Replace the 2 resistors at it might...
In my case, the 2 resistors R51 and R52 on the DC buss were open.
Replace the 2 resistors.
Hi Guys,
I think i have a problem with my Hurco Hawk 5M. When i try to run a Tap cycle, i constantly get the error "Speed Too Low" if i try to use a speed under 550 RPM. With a drill i can use low...
P.S. I'm located in Europe, in Romania. But i can ship parts if you need them, or even the whole machine. Shipping the machine across Europe should be around 1.000 euro, i guess...
I also scrapped...
Guys, i'm selling my Hurco MD3 if anyone is interested. We had this machine in our company for more than 10 years and it NEVER worked. I think there are some wiring or electrical problems that we...
Thanks for the reply. I'll contact him.
Hi,
I have a Hurco KM3P with some errors on the Z axis. I suspect it's the Personality Board, but i'm not sure. The machine is running ok, but when i run a drilling program, as soon as the drill...
Well, i'm here again, after all of these years...
Thing is that i stopped working for this company for a while and now i'm back for good and the machine is still not working. They bought the...
Hi there again!
It's been a while since i had those problems with my machine, but, happily, i managed to fix it back then. Now i have a different problem.
Because of some chips, one of the...
Hey guys, i still haven't figured this out. Still waiting for some of your help, here :drowning: Thanks a lot!
Greg
I'm back with new informations (problems :tired:).
I don't know if the motor was stuck while the power was on or off, i just know i couldn't home the machine because the motor on the Z axis...
So, i'm back with some new info. I had to take a break because i've been reasigned for the last few weeks.
I did some tests on the machine and this is what i found out:
The machine is working...
I just ordered some new brushes, but i don't think that's the problem, because i swapped the motors and it's still not working. The problem is still on the Z axis, even after swapping the motors.
...
I still haven't fixed my machine. I hit a dead end trying to find the problem and i just left it and worked on something else (for a few years :tired: ) . Now i need to use the machine. So, i have to...
Hi. I own a KM3P Milling machine and i've been trying to fix some problems for the last two years, i think. The machine used to work fine, until one day i got the overload message on Z axis. I was...
It seems like Gildemeister lathes are not that easy to fix, because no one gives helpful advices. Even DMG Romania are not helping with anything, so i have to try fix it by myself, without any wiring...
Hello. I own a Hurco KM-3P Milling machine and i've been having problems with the Z axis. If i try to run a drilling program, when the tool touches the surface of the part, the Z axis stops and i get...
So...the latest updates... First of all, i bought this machine a few years ago, but i didn't use it, because i had the chance to buy a Hurco Milling Machine and i used it instead, being easier to...
Hi everyone!
I'm having some problems with my Bridgeport Series 2 Interact 2... When i tried to home the machine, after the X and Y axes were homed, the Z axis didn't move at all, so i opened...
Hi everyone!
I'm having some problems with my Bridgeport Series 2 Interact 2... When i tried to home the machine, after the X and Y axes were homed, the Z axis didn't move at all, so i opened...
Hi. I need the electric schematics for Bridgeport Series II Interact 2. Do you know where i can find them? Thank you.
I talked with Gildemeister Romania, but they said they had and argue with Gildemeister Germany and asked me to wait until they fix their issues...
I changed plate nr 2 with another plate from...
Hello!
I own a Gildemeister NEF CT 40 Lathe and i think i have some problems with the CNC board. When i turn on the machine, i get these messages:
DISPLAY AND GRAPHIC INTERFACE......0.064.110....
Hello again. I managed to fix the old problem with the Churchill lathe, but now i have another problem. The lathe worked fine for a few months now, but today, one of my colegues didn't pay much...