Search:

Interesting question Ted!

Seems pointless for others reading on this forum possibly 10yrs from now to solve something like this offline without returning to update the thread. Unless of course...

I typically use the tool setter but when that isn't an option I use the measure function. Call the tool to be touched off in MDI (G54 T0101) to make that tool offset active. Then touch the tool to a...

Apparently it's not liking one of the decimals in one of the variables in the canned cycle.

See if it runs this way?

G71 P100 Q101 DO5OO U0200 W0200 F0100

You need a G1 in the N100 line.
...

Here is how I found it on my machine.

Hit the "SYSTEM" button then arrow over till you see "PMC CONFIG" hit that soft key, then the "title" button.

My program drawing NO. looks like this.
...

Look through the ladder and see if you find any mention of the M250 code? It's possible your lathe doesn't have the service mode function. I believe that is the only reference I found to the code in...

No problem Dan...

Glad you have this matter sorted.

Yeah I'm pretty sure it was the Q decimal causing the issue with the other operators code.

Brent

I also might add that on my control I've not had complete functionality of some of the canned cycles. Don't know exactly why? It May be that complete functionality is an extra paid option idk?
...

On my 0i-td G74 is peck drilling. If I want to come out of the hole completely I use G83.

G83 X0 Z-1. R.1 Q0800 F.005

R is the return plane. Q is distance of infeed between withdrawals.

I...

I think he said it was a haas don't know what the tips are on them or fanuc. lol...

Brent

Good deal!! Glad everything worked out for you.

Brent

As to the finish allowances. Yes you will not be able shift the Z at all in the canned cycle or over cutting will occur opposite the shift by the finish allowance amount. In this case I would write 2...

Like I say I'm not a HAAS guy. On my Fanuc the only way the control compensates for the radius of the is using comp G41/G42. Typically on parts such as yours I save me some headaches and figure it in...

I'm surprised either side turned out to spec without using comp. I don't see finish allowances U & W in your canned cycle? Im not a HAAS guy but try these numbers. I'd use them to make your part on...

Yes on my Puma there is a key switch on the control panel that changes the chuck grip from internal to external and vice versa. I'd guess your Lynx had a similar keyed switch.

Brent

First thing I'd look at is to make sure the center piece that threads onto the draw tube isn't coming un screwed.

Brent

I guess I misunderstood your question. My 240 is a newer Doosan I don't think I have that "tool set" button. I'll look again today.

Brent

I call up the tool G54 T0101 then move to where I want to set Z zero. You have to have to Z G54 number highlighted then type Z0 measure and boom it changes the G54 work shift to where your sitting at...

Riddersholm,

I sure do appreciate your help. Thank you.


Brent

After further review. Yes all I need is the macro call blocks G1133 & G1461... I will never use Manual Guide 0i to drive the control on a regular basis but this is a handy as hell tool. Just about...

Ok so I did get a chance to fool with the control and did get the simulator to run.
No I will not be able to use the G1133 or the G1471 in my programs.


O2222
T1111
G1900D2.5L4.K0.1...

Riddersholm,

Your mail box is full. If I need more help I just might take you up on your offer. Thank you again.


Brent

That is great news!!

Sir. I thank you for your time and your help!!

Brent

Thank you again for the reply,

So it sounds to me like the tool set up information is for the simulation. Witch I wouldn't be needing. I would just watch it run on the NC graph.

If im...

Thanks for the reply.

Not in front of the book at the moment. But it talks about canned cycles. Something similar to this.

G1113 x z r k d

and

G1461 a d c d e f g h I j k l m n o p q r...

Thanks that would be great. I'll PM you the email. Machine is a puma 300 C. If I get stuck maybe you can help. Thanks again


Brent

Hello

I know nothing about it. I have seen reference where people mention a NC convert function
witch will change the Manual Guide program into regular G code for use in other machines.
In...

I don't have any idea about the transformer issue. If it is that then maybe someone else can help. Way back when I was on 6T machines. while in manual mode there were just 3 buttons on the control...

Hello melweiderer,


Sorry I cannot help or am I actually sure I understand what your problem is. Although you posted in the correct machine specific part of this forum, this the Daewoo/Doosan...

"Can you help me?"

I am seeing this kind of lack of common courtesy more and more often on these kind of forums. People have a problem that they need help with and come to a place like cnczone to...

On page 254 of the big yellow fanuc series 0i-MODEL D parameter manual.

Parameter 5002 bit #2 LWT Tool wear compensation is preformed by:

0: Moving the tool.

1: shifting the coordinate...