Search:

I understand that and thanks. I was trying to go from 1st gear to 2nd and if the previous tool was CSS and I start the spindle in 2nd gear on the next tool it is erroring intermittently. So something...

I am programming a fanuc 21ti controlled lathe and have the following code off the top of my head and get a spindle programming error. In the manual I remember G97 ignores the max rpm but I just want...

Did you ever get the manual and which one?

Glad it helped!

Anyway did what I post help you out at all? I have 4 machines with this in my area and another guy has a bunch of the older 950 and 850 in his area but we mostly poke holes with them.

Try calling the T0000 on the line before the G28.

I agree with under the tire but I will say this, the 2100 uses your cutter comp on those cycles if I remeber right and if you input the data wrong it will affect the size of the holes. What was the...

I agree that G84 shouldn't work. I think a bore/ream cycle which gives feed in feed out would be the way to go.G85?

I took it as he was not wanting to G53 every move. No big deal just another option. I didn't know there was not an option for B. Interesting.

Could you just use an offset with zeros in all the axis? Like G54.1 or another? Maybe even write your current values for the offsets to a common or local var and then set them to zero and then reload...

If one of your offsets had zeros in all the axis couldn't you run it from that offset? G54.1 or some other?

Would something like this work?



Startup code to your preference
G0 G94 G17 G40 ......
g54
M98 p2222 (call to sub program, the O number)
G55
M98 p2222 (call to sub program, the O number)

They ended up just using the normal skip. I looked but couldn't even find the common var page. It is a machine that the mfg put their own spin on the ole fanuc and I think they hid a lot of the...

I got with Okuma and Renishaw. They had me write to common variables when I calibrated and then depending on the current probe load those into the system variables for the correct probe. I am not...

They are using the normal one for skipping something else.

If and jump through a var was what I was going to do but was asked to come up with a different way to do this. I thought of the multiple skips but had not used them so didn't know anything about...

Ok cool. So if I get to that page then the control supports it? This is a new machine and am looking to write to these possibly to shut off sections of code, is that possible? I have written post...

I read in the Oi manual that it is possible to use /2 etc block skips by turning bdt2 etc on or off. How would i know if this option is available on my control and can I write to that to turn it on...

I was wondering about where that info was stored. I will get with Okuma. We do have a Mazak that is running 3 probes at this time but I know that is a totally different controller. The programmer of...

I am needing to use 2 different Renishaw probes on a MA 600 with an OSP 200 using the Renishaw macros. Is there anything I need to do special to have this work? Thanks in advance.

I will take a look at this when I am out at the machine asap. I have tried to assign the programs to the pallet like setups 1 and 2 but it just tried to run both programs in succession. What I ended...

This would be running a seperate program then? How is this set up?

I am going to just try probing for location and doing a jump on whether it hits or not.

Have a 5 axis 630 and I am trying to get the machine to run one side of a part on the rotary and then shuttle the pallet, flip part and run the other side either continuing to run current program or...

I have not. The part I was going to try this on has not been released to me as of yet. I have been covered with urgent requests lately so haven't been able to even look at inserting the lines. I will...

Awesome! This is exactly the help I needed! Thank you sir! I will give it a shot.

On an 840D is there any way on the control to find out what the H or M functions are? As in H8=1 or M 21=80 . Thanks in advance! We have no machine specific manual, just an 840D Siemens manual.

Are you cutting a slot of this shape or the outside? What cutter diameter?

Has anyone used this on a machine center with OSP 200 or similar control? I have MA 600s and want to try this out. Thanks in advance.

Ya I enjoy learning new things probably more than anything! I got these mills dropped on me with no training and no experience with them so I got a lot to learn about the Okuma programming. I will...