Good morning,
I'm trying to load programs on my Hardinge CHNC1. I have another machine identical to it that I can load programs on but there are a few small differences like it has a parts counter...
Type: Posts; User: K_Labs
Good morning,
I'm trying to load programs on my Hardinge CHNC1. I have another machine identical to it that I can load programs on but there are a few small differences like it has a parts counter...
I have 2 hardinge chnc1's and I can get one of them to send and receive programs but I can't get programs load on the other one. I'm getting 086 alarm and 071 depends on the day.. I changed the...
No need to pull your cover. Thanks for the quick response. I got it squared away. The machine is working great again.
FIXED IT!!!!! I pulled the cover off to check some voltages and one of the wires was unplugged. 6 wires come from the encoder. TB9-4,5,6,7,8 are all still hooked up. 5 out of the 6 wires are...
Figured it out..... Had a brain fart moment and forgot to enter the program name before I hit capture.
I can send programs from my PC to my CNC but I am having issues sending them back and I need to because I keep getting a 087 PS Alarm because I run out of memory. I get no errors on the CNC side. I...
Ok so I slowed it down and it is indexing correctly now. Is this just a bandaid until I get the stop assembly figured out?
How do I slow it down? I was lazy and took the encoder top plate off and moved the sensor to the correct place. It fixed my tool call problem but idk about the index issue yet.
Ok so I just loaded another program with the same tools and offset. It is to do some backwork ID chamfer just really fast. I had a G4 T0606 call and it went to T3.....? Could that be my problem? Just...
I have been having turret indexing problems with my CHNC1 I've been working through it by just going into jog mode and then doing a manual turret index then back into edit mode and picking up the...
Hi I need some help with my machine. I am trying to use the M19 function in MDI for spindle orientation and I keep getting a error message. Specifically Illegal M code 2006. Am I missing hardware or...
Just bought it!
That's the problem there isn't a video card in there to begin with.
I purchased a non running 1995 BMC30 HT/M for a reasonable price. I had the tech come out and he said I needed a dual video card and it's no longer available. What do I do? He was saying to spend 5k...
FIXED IT!!!
Ok. So I got it fixed. My brother and I had to take off the spindle cover and it was pretty simple. I'm really glad we didn't have to call in a Haas tech. I did some reading and I...
It was bad before but the wash hose is full power now. I just bought a new one because it had a kink in it.
The thing that gets me is when u push the coolant button the motor is strong enough to...
Hi I have a VF2 the coolant hose to clean the machine wasn't working very well and neither was the coolant by the spindle. So I bought a new check valve and it's working now but only the wash hose...
Actually you could be missing something very simple. I was at it for weeks b4 I got ahold of some1. What I was told is that the bandit will not power on unless it has 220v and the 110 active so on...
I was wondering... If I only need the NC400 amps for 100VDC for the servos could I just bypass the rest? It seems that my runaway problem is due to the 15Vdc + and 15Vdc-
http://www.contraves-drives.com/pdf/M502001_d.pdf
So I found the answer but I don't know what it means.
Page 7-2 #4 Wherre it says: A runaway condition is cause for close scruting of polarities.
So I found the short and pulled the wire now my power supply is getting 24V to the bandit and it powers up. Now my issue is that the servo motors are running away. They are not hooked up to the ball...
So I talked to him again today on the phone and alot of progress was made today. I'm overjoyed! He talked me through a ton of stuff and I was able to actually see the display light up! Tested quite a...
I think that I need the NC400 power supply instead still not sure of which direction I'm gonna go. I am interested in the power supply for the bandit tho lmk how much he wants for it.
So basically I talked to the last guy who worked on it. He told me that when he checked it out the motors ran away and so he pulled them off. He told me the power on procedure. I did it but still no...
Located in Santa Fe Springs Ca
I do have power to the QuickDraw tool changer. It is equipped with NC400 servo controllers. I am using the old servo motors.
Well that's exactly what I plan on doing and I have already purchased a KFlop W/ Kanalog but I'm not getting any power anywhere and frankly I'm stumped. Would u gentleman be willing to help a...
So I have a bandit I have been trying to work on it for quite some time with no forward progress. It sort of powers on. I took the cover off the top and depressed a switch next to the 115/230...
Can't argue with u there wood cases look awesome
Ziplock bags from McMaster fit my iPhone perfectly and keep the oil out.