Any tsugami users have problems with sub collet sticking? Chuck completely disassembled toggles and all, no chips or contamination. Machine only month old
Type: Posts; User: davidw731
Any tsugami users have problems with sub collet sticking? Chuck completely disassembled toggles and all, no chips or contamination. Machine only month old
Thi is my first post Machinist for 30 years Cnc for 15. I found a Newing hall NH600 engraver that is in great shape but has no control. I would like to convert it to a router by adding a Z axis. The...
This could be hex drilled with a Watts bros tool works hex drill, not sure if they go that small, we drill 1/4 hexs where I work, this is the basics of how it works. ...
We have 2 older citizen L25 they have been very reliable and accurate. We also have 4 tornos machines, they're much faster but tend to break down a little more often. For us tornos suppurt is much...
thanks guys i'll try these monday
If your parts are less than 1.062 in diameter you could look at omni-turn. They have basic live tool capabillity and are lower priced
I have this macro for deep hole drilling on a lathe with fanuc control, it works great but it only works drilling in the Z minus direction. I would like to modify it to drill in the Z positive...
Your X starting point and ending point are the same. Your go X1.1441 should be the major dia of the thread or larger. The G76 X1.1441 should be the root dia of the thread. The number of passes will...
Make sure the arc or chfr will fit between the two linier moves. Also on our cobra the r or c do not use commas but have to be signed for the direction of cut for example
GO X0
G1 Z0 F.005
G1 X1....
Try this link http://www.newmantools.com/tech/threadmf.htm