I changed that this morning and it works.
Once again, I appreciate your patience and quick responses.
Type: Posts; User: crasher455
I changed that this morning and it works.
Once again, I appreciate your patience and quick responses.
To follow up with the last post.
After working on this further I changed the CNTS_PER_REV to 60 and the SPINDLE_AXIS to 7.
It acted very flakey when I hit the cycle start button but didn't...
I've been busy at work and finally got back to this thing.
I changed the VAR to 60 and now I get readings on the console when I execute a G84. But now what happens is it will move to the R height...
I've attached the SpindleJog.c program I think this is what sets the "S" action.
If I use the Jog7=200 command it outputs the step pulses to the VFD board but doesn't switch on the forward or...
I have never been able to jog the spindle as an axis. I have it configured as axis 7. But I cannot use bit 43 for the direction output.
In order to get the pulse width long enough to trigger the...
The spindle reacts very very quickly it is controlled using a cnc 4pc C6 board to convert STEP/DIR to an analog signal. From what I saw manually programing a taping cycle, it should react fast enough...
I did a short video showing what the machine is doing https://www.youtube.com/watch?v=gyp7XBCrblo
I tried that this morning and it makes no difference.
I'm having a glitch in Kmotion when trying to use G84.
I don't currently have spindle feedback so I was hoping to just use a floating tap holder.
The problem is when I execute G84 The command...
Thanks,
I was able to get it to work. I did put the whole code into the main INIT program and put the stuff that was in the forever loop in SETfro into the forever loop in the INIT program.
I don't know if it maters but here are the EXTernal button program and MPG program.
I messed with it some more today and found my error. I had to enable the encoders in the axis channels on the init program to get them to work.
However I am having two other issues.
Issue 1. ...
Click-3 was a typo. It should be A=0 B=1
So I'm running into an issue using small panel mounted rotary encoders to drive my feed-rate overrides.
I'm using the sample program SetFROwithHWEncoder.c.txt? and GrayHill 62AG22-L5-040C 16...
To follow up on this post. I did get the system to monitor the servo ready signals and shut it down if it detected a low signal. I just used a simple IF, ELSE command to monitor the input bits and...
Just for some background I am retrofitting a Tree Journeyman 325 Mill.
So far most of the project is going better then expected. I am using AASD-30A 1.5KW servos and a Lepond 7.5 KW VFD to drive...
When I first purchased my 1982 Hitachi Seiki Fanuc 3TF It did not come with a set of manuals and I had exactly the same problem as you and thought something was wrong with the machine spindle
...
Miller sells a machine style torch for that machine, Torch, ICE-55CM that gives you an extra output connector for using an external trigger switch. However it is very expensive. If you want to us the...
I would recommend trying to sell the parts on EBAY. On a 1990 machine I don't think Fanucworld is going to offer you very much at all. I recently parted out a 1992 Excell 810, fanuc OMB machining...
I'm also having a similar problem. I purchased the XHC wireless pendent for use on my cnc plasma and cannot get it to connect. I Installed the plugin "which I had to download from from pc4cnc.com...
I live in North Lake with a Hartland mailing address. My shop however is on the north east side of Milwaukee.
I had a tooth profile generator plugin for AutoCad. It was freeware at the time. I...
Depending on the pitch size sometimes they can be interpolated on a cnc with a small endmill. I have had good success doing this with some 8 tooth 6 pitch 20 deg pressure angle gears.
I did some more searching today and found 2 different companies that can make the encoder extension cables I need for this, at a very reasonably price $125.00 per cable. I know I can buy the Amphenol...
Here is the background on this project. I removed a Fanuc OM control from an Accel Kiwa 810 VMC that was scraped and want to install it on a Devlieg horizontal borring mill that we purchased.
When...
I have actually built 2 cnc tube benders both using pc based parallel port controls. These machines are both rotary draw type similar to a Pines. The rotating head is driven from a 5" x 18" stroke...
I would definitly try using the hanita varimills as well I have been using them to cut down a welded surface on a 304 stainless part, and was absulutly amazed by how much material could be removed...
Lately I look online for indusrial auctions in my area. Just go on google search and type in auction companys and your state. You should be able to get a number of different websights for local...
(chair) (chair) I usually shop at auctions for used machines. there are many great deals to be had. However there are some rules I've learned to follow when buying used machines at auctions.
first:...
I usually use a grade A6 3m Trizak belt on stainless steel to take out the minor scratches before buffing.
However for hard to reach spots I recomend using a Walter quickstep fine"blue" surface...
I've seen used SpectraPhysics 820 and 825 co2 lasers for under $25,000. There in the 1.5Kw to 2.5 kw range.
I had an Amada lasmac 644, at my shop with and 820 laser and It cut 1/4" steel well.
If...