Thanks alot dear engineer Enikma_ll for ur reply....
Type: Posts; User: rami_429
Thanks alot dear engineer Enikma_ll for ur reply....
Do u have the same machine ?
I'm not sure until now . ...is the next step is buy new part or there is something else??
Its A20B-0008-0410
Excuse me , my English so bad .
It's big problem ...I should be buy new pcb master and crt card .. I don't know what I should be doing with these! !!
No , I don't have .
I was unplugging the PC-model B and test it ... nothing was wrong ... so I think that the PCB master or the crt I /o fault. .
Which one that o can test it on the main board
When I power up the machine by pressing the switch on key on the crt .. I see that
Rom ready
Bubble ready
Alarms message
Not ready
Thats mean the rom and bubble carts is work well
..so...
Dear sir, Enkima_ll
I was checking the ground its ok ... I measured the ground resistance,so its in the allowed limits..
The switch off lamp is light ..so the machine is power off ..only the crt...
fanuc 6m-b problem
I have centrum 1000 fanuc 6m-b cnc turret punch ..I have problem with it.... alarm message on the CRT display when I power up it ...I think that the ex worker who was working on...
Dear agering
That's my email [email protected]
I will be thankful and appreciative
Dear agering
I did all things that u tell me ... I can't change any parameter. ...do u have any idea about that?
My dear agering
Does you mean changing 10011000 to 00011000 ?
255296
I can't switch MDI mode on
On the other hand, power off lamp is light
Ok, I will check that. ..thanks alot .
Yes I can enter the parameters list.. .so
.how much percentage (probability) that can you give me it to replace the master PCB ??
Dear sir ,
I did checking hardware for PC model- B, nothing was wrong , so how I can do checking software for it
Dear sir,
It's Fanuc 6M-B
PC-B
Thank you my sir Heavy_Metal .....I have the manual , maintenance , alarm list ... but I don't sure what I should be doing with these alarms (600 603 607) ....
600
Data transferring error took...
Can anyone help me with the fanuc 6m??
I have this errors
600
603
607
This is appear on the CRT after I unplug the 6 wire connector that located on the power unit
So before I did that there...
Can anyone help me with the fanuc 6m??
I have this errors
600
603
607
This is appear on the CRT after I unplug the 6 wire connector that located on the power unit
So before I did that there...
Can anyone help me with the fanuc 6m??
I have this errors
600
603
607
This is appear on the CRT after I unplug the 6 wire connector that located on the power unit
So before I did that there...