Hello
I building a new cnc with dual Y axis, and i am wondering if one DQ542MA driver can move both steppers?
Type: Posts; User: crimar
Hello
I building a new cnc with dual Y axis, and i am wondering if one DQ542MA driver can move both steppers?
That worked perfectly!
Thank you so much!
Ah, of course. Why dident think of that! Thank you.
Do you have a idea how to get the pocket for the circle without need to pocket the entire hole?
Hello!
I want to design a speakerbox with 19mm MDF.
What i want on the ends is lips with the width of 19mm so the sides goes easily togheter, when i am going to glue them toghether.
Does...
Hello!
I wanna build a cnc for cutting mdf and plywood.
I thought are too use these (Mini V Wheel Plateâ„¢) and these (V-Slot Actuator End Mount) to connect several v slot rails.
But will a...
Okey. Thats a bummer.
But i have seen alot of alu extrusions on different china sites. Is there a good design for these?
Hello! Could you upload a picture of it?
I have looked at something like this 256168
But as ger21 says reinforce it with steel angles.
Hello!
I have a small 3040 cnc, and my dream is to build a bigger one for speaker building. My bigger machine are just cutting wood.
Is it possible to make a cnc machine with a 600mmx1500mm cut...
I have been looking at a design like that, but it require that i make a holes likes this: 254368
If not i cant attach the lower two bolts on the nema 23 motor.
Hello and thanks for the reply!
Thats sounds like a good option. Do you have a visual representation of what you described?
Hello!
I have a pair of SBR-16 and a complete 1605 ballscrew, both 300mm in length.
But i cant seem to design a good z-axis for myself. Anyone who wanna help me?
I have a 3040 cnc so if you...
Hello!
I wanna build a cnc machine with aluminum extrusions, but i need some help.
I understand how i mount the extrusions together, but i need some tips how mount the stepper drivers and...
Hello
I have a arduino with grbl installed. I also got three nema 23s. I have tb6560 but I have now like many others learned that it is some cheap crap.
The dq542 looks good, but as a CNC noon...
Hello!
Trying to build my first cnc machine, but i have a problem. My PCI paralell port only outputs 3.3 volt.
Is there a breakout board and driver that can work with that low voltage?
Hello!
I have a TB6560 board where the Z and y axis work just fine, but the X axis wont move.
Anyone had this problem before?
Okey.
I did contact a local mechanical shop, but the prices they demanded for some simple aluminum pieces was sky high.
I am gonna try print the parts and reinforce them with fiberglass, then...
Because it will days to print the parts :/
Okey.
My plan was using plywwod for most of the CNC. Gantry, support and bed. Just print out parts for the CNC axis for the accuarcy it gives.
I may print, then reinforce it with fiberglass and...
Hello!
I have a 3D printer and i wanna build a CNC.
Would ABS printed parts be strong enough for a Z axis? With 20% Infiil?
Any experiences?
Hello!
I have just bought a 300mm 1605 ballscrew with ends.
Could someone help me with a good Z axis design wich can be built with MDF?
Best regards
Hello!
Could anyone tell me what the total travel distance for a 1605 ballscrew with a length of 200mm and with BK12 and BF12 end supports.
Thanks.
Glemte å nevne det, men må kunne bygges i MDF :)
Heisann!
Er det noen gode forslag til et enkelt CNC-bygg med ca 1.5mX0.5m kuttedistanse?
Har for tiden bygget meg en liten solsylvamaskin, men skal bygge en større i sommer og vil starte...
Hello!
I am a newbie who has taken a small step into the cnc-world.
I have bought a tb6560 board and three nema 23:
Wholesale Product Snapshot Product name is A908A 425oz-in 3A 112mm 1.8...
Kult!
Har kjøpt ganske kraftige steppermotorer selv, så håper jeg kan kutte aluminium senere, men den større fresen.
Kjøper ikke ferdig utstyr i lydverdenen :P
Takker!
Når jeg skal bygge den store versjonen blir det kuleskruer. Den er på 24x48" eller 62x122cm. Da skal det bli gøy å lage høyttalere :D
Så med 1/8 microstep skal det se slik ut?
218310
Thank you very much!
The problems aint my math skills, but i dont know the formula.
Peoples lack of common decency if beoynd my belief Mzones.
Okey, thanks! Will try this!