Search:

Looking for a nice 4' x 4' or roughly that size CNC router.

Does anybody have any good Chinese companies to get one for cheap just to get me started?

Thanks

Well I'm going to start seeing if I can drum up some nice work in my area and I need to get a hold of a CNC machine that is relatively cheap. I'll upgrade to a better machine if demand needs it but...

Hi all,

I'm currently looking for the best wood working art software. See my picture attached for what I want to do in terms of complexity. Currently I am well versed in Solidworks but I can't...

I'm trying to develop my surfacing/solid modeling of intricate art structures. Anybody have any youtube videos or online tutorials on how to make intricate models?

Thanks

Also I'm willing to do a light FEA analysis within Solidworks for free as I've had a couple inquires to this. This would only be for information purposes only as I won't certify it because of the...

Well in celebration of starting my own company/consulting I'm offering free modeling of parts/components to anyone. Along with this will be a detailed technical drawing. Just trying to get my name...

Well in celebration of starting my own company/consulting I'm offering free modeling of parts/components to anyone. Along with this will be a detailed technical drawing. Just trying to get my name...

So I have Pronest V8 and I'm outputting the CNC code for our machine (Torchmate) but the code takes FOREVER TO GENERATE. I'm trying to figure out if it's a computer or software issue... not much help...

I want to mate them together for simplicity sakes for my rack and pinion. i want a nice clean setup and think that would be the best bet.

I'm looking for a combined unit for a step timing pulley. I have thought of a ton of different ideas and need your input.

Here is a picture of something i'm looking for. Basically have the...

dnelso,

Again as said by many wonderful job on the machine.

I'm currently in process of designing my table on Solidworks and I am very curious as to your side rails and how you attached...

Exactly I say 1" is my ceiling. I don't think there is any need to cut really anything above 1/2" as it is for my realm of work. Anybody else help me out with the above questions?

My build budget including purchase of a plasma is right at $3000 (+- $500)

I have thought about buying a pre-made gantry. I found one here:
...

Well I've been reading alot on the forums here and I have finally stepped up and will design-build my plasma.

So my expectations:

- Good to Great cutting tolerances (I want to really cut some...

My CNC Setup First:

Burny3 CNC Controller
Type: MNC3-03462-0

Burny Replicator 900
Type: MYX-09345

Problem: I'm drawing a part in Solidworks with SOLIDCAM and using it's Gcode to output to...

YES PLEASE! I'm newly at this and have spent about 2 days figuring out the language and the operation. I'll PM you my email address so you can send it over.

Couple of more questions: Which...

Ok my setup first:

CNC Controller:
Burny 3 CNC Controller (This thing is pretty old also)
Type: MNC3-03462-0

Parts:

I'm making are ALL 2D cut with either the plasma or oxy/acyet from 1/8"...

Ok my setup first:

CNC Controller:
Burny 3 CNC Controller (This thing is pretty old also)
Type: MNC3-03462-0

Parts:

I'm making are ALL 2D cut with either the plasma or oxy/acyet from 1/8"...

Any other help? I'm still wanting to figure out how to take those .cnc files convert to DWF or DXF so I can open them up and get the 2d information off them to make Solidworks Files.

I'm a CNC absolute noob. I'm not sure what your saying here other than there is a conversion problem between the 2.

I just used your program and get a bunch circles with brown lines. Using Discriminator I know what the profile of the part I'm trying to make is not that heh. Any help? here is the code:

%...

I'm not sure if this is remotely the right section but hear me out.

I have a load of .cnc files that I need to convert to some type of DWF or DXF file so I can read them in SolidWorks.

I'm...