Thank you for your reply Alex,
Regards
Brian
Type: Posts; User: bbrreid
Thank you for your reply Alex,
Regards
Brian
Hi Alex,
I have another machine (Yamazaki) with a 6Ta control which does upload and download without any problems so I swapped circuit boards and when I powered up the Mori I got a 600 fault code...
Thank you very much Alex, I will check this out this weekend
Regards
Brian
Hi Alex
0) 10101010
1) 01101101
2) 10100010
3) 10101000
4) 00000000
5) 00000000
6) 11010001
Hi Alex, thank you for the reply, yes to both questions, I remember I read somewhere that the old Mori lathes would only send but not receive programs.
I am trying to identify the box on the photos...
I have an old SL3 which I bought along time ago 3rd hand and have never been able to down load programs from a PC with RS323 cable. I also have a Yamazaki with a 6Ta control and this machine uploads...
Sorry guys I have posted in the wrong forum My machine is a Beaver VM5 CNC milling machine but thanks for all your replies. I dont have a manual, I just dont know where to start, I would probably...
Hi all,
I had my vise over the end of the table when I jogged the Y axis and it the back pillar, now when I jog the table, the ball screw is trying to come out off the machine.
Is there a circlip...
Problem fixed by ex Mori Seiki Tec. I know ,turret off, reset with dial gauge,reamed,dowels replaced,limit switches reset,now working.
Thanks to all for help
Thank you will do
Just an update on problem also looking for any manuals on the Mori Seiki SL-3
Turret sitting on position 1 selector switch on 1 when pressing green turret button the turret moves forward then back...
Thank you for the reply,can you please point me in the direction of the switches, are they the relays on the cabinet door?
Hope someone can help, when asked to index to next tool the turret moves forward but does not index, we have fitted 2 new relays (my4 24v) to lower part of rear control panel also the green light...
I have Heidenhain 355 still showing "Z alarm" even with all drives removed when trying to home also ATC light flashes (its a manual machine) along with M01 and SPINDLE OFF lights
Any ideas guys ?
Problem
When pressing control on button Hydraulics start and run for several seconds then switches off again.
This time a watchdog alarm has occurred.
The signal from MS2 ( Hydraulic contactor...
Puma 6 fanuc 3TF
Problem
When pressing control on button Hydraulics start and run for several seconds then switches off again.
This time a watchdog alarm has occurred.
The signal from MS2 (...
Once again thank you for all the help and the scanned info it is getting me nearer to having the machine up and running
Thanks to everyone especially FORDAV11 I now have most of the parameters I was looking for
still some little probs when I push the power button on the panel the hydraulic pump starts but stops when...
Thank you, will do
Thank you that would be very helpful as the photo of the param. is not very clear and the first 3 are missing
Regards
Brian
Thank you very much for taking the time to do this
Best Regards
Brian
Can anyone please help with my Puma 6 lathe serial No.310088 with Fanuc 3T
the machine was in storage before I bought it and the company who owned it no longer trading. I need the parameter list to...
Having a problem with my matchmaker cnc mill and I hope someone could help
When I try to switch on the drives to home the machine I get "X Amp Alarm" also Y and Z "amp alarm" with "Spindle Off "...
same fault "Amp alarm " with SPINDLE OFF and ATC AUTO lights flashing and the machine manual has a hand written note by the previous owner "BRAKE OFF PB FAULT "
Can anyone help please
Thank you for your helpful replies (apart from one) 8" is the max I can manage on my SL3
I have a 1983 Mori Seki SL3 lathe with Fanuc 6T (A) control
can anyone tell me the max diameter you can turn on this machine,
I have seen so many different statements on the web like 9" 10" even up...
I bought a PC at an auction with Featurecam installed and have been playing around with it but it needs to be corrected in some parts of the post processor where it uses canned cycles for turning...
This is all good banter but I still have a broken joystick. I'm sure Mark has one lying around
that he could give to me at much cheapness.
all Arbroath is good for is giving people cancer by...
Thats not bad coming from dumb and dumber, we are not the guys that have sayings made up about them like "Fifers sup with a long spoon" or " he comes from Fife spelt FLY"
and Mark I'm sure you...
Thanks Gus , I am