I am about to buy the 3.7 Kw to 5.5Kw version of this motor.
Does ANYONE have any experience with this company
https://www.ctbservo.com/product-category/servo-spindle-motor-z18/
Type: Posts; User: GusBiz
I am about to buy the 3.7 Kw to 5.5Kw version of this motor.
Does ANYONE have any experience with this company
https://www.ctbservo.com/product-category/servo-spindle-motor-z18/
So I am in the middle of Re-Building a BF46 Vario Optimum mill.
I am basically building the head from scratch, building the saddle from scratch, adding 750W servos, a 5hp servo motor driving, a...
Do you still have yours?
Have you made the change?
Gus
I have come to realise its actually some vibration in the drawbar. I changed the collet chuck and all of a sudden the noise was happening at a different RPM and yet it was consistent to that initial...
try this for the video link
https://www.youtube.com/watch?v=yU7PD8AB-zM
I am about to do a complete tear down and I see if I can't create a new mechanism for a belt drive and get rid of the gear drives all together.
No I haven't run it while warm and then increased...
Hi Guys,
Firstly, I have a BF46 Vario and had no idea that the spindle was not supposed to get that hot. I have measured temps of 90 degrees C/194 degrees F.
Yeah now I realise, crazy hot. I...
Juan,
What have you set the Tolerance to on the spiral?
This is a screen shot of the tolerance setting.
354290
I am about to start tuning mine.
I have the HBS 2206 which is supposedly identical to the 2306 version.
If you look up the Choosing Protune driver pdf (attached ) it states to use...
This is the Add on ebay
CNC Mill
It reads
This is a CNC converted Manual Mill. It is 150kgs
I has Nema 23 Steppers and a Promica Conversion Kit.
It has a 1 Hp head and an ER 32 collet...
I am in Melbourne and have one I want to sell. Only because I bought a half tonne machine.
Had all the bearings up graded spindle goes to 4500 rpm. Has backlash compensation system on it and works...
Here it is.
5I25 picture
Dude, it took 3 seconds on a google search. If you had trouble with that then this is way too hard for you.
You will also need a corresponding breakout board.
...
The IO card is from Mesa in the us, the software you order from Tormach, and I am still in the process of making it all work.
have a look at this link.
PathPilot on Non-Tormach Wikia - Wikia
...
Hey guys,
I am setting an Optimum BF 46 Vario and running pathpilot.
It will be an upgrade from the old mill which I will sell.
I would like to control other things with it, like a...
So I am getting a hell of a racket from the bearings that guide the lead screw of the Sieg x3.
This can be solved by adding a good quality grease to the bearings but how do I get to them without...
Guys,
I have a client that changed over their controller for another one and they had a Promica Machine.
As a result I have a couple of perfectly working AXIS cards here.
If you want one its...
Paul,
Completely appreciate your response, but the issue is that they are already tripped and headed the other way.
The issue is that they haven't actually been tripped. Its a switch that is...
Guys,
I have a Promica mill. Turn Key solution. ie 100% build by Marc.
I have been out to see itchy's mill and have used my controller to make it work. It worked. The controller he has does not...
Nick,
wehre abouts are you in Aust?
PM me if you can.
Gus
Paul,
Have you recieved your kit?
I live 15 minutes drive from Marc, I have a kit and he doesn't return an email or phone calls.
Guys,
I am probably Marks last mill for a while.
It took him 4 months to compelete my mill and it too a great deal of energy for him to do that. He still owes me a rotary table that I have paid...